Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep edge sanding belt describes this SurfPrep 80 Grit 4" x 132" Edge Sanding Belt Aluminum Oxide on Cloth, built as an abrasive belt for edge work in woodworking and similar sanding tasks. The 80 grit rating shapes and smooths surfaces in one step, which supports stock removal while preparing edges for further sanding or finishing. The 4 inch width focuses the sanding action on typical edge profiles, helping operators stay on the workpiece without wandering. The 132 inch length matches edge sanders that take this size, so the belt tracks around the machine properly during use. An aluminum oxide grain provides the cutting surface on the belt, so edges are abraded evenly along the full loop. The cloth backing supports the abrasive during continuous passes, which helps the belt stay stable as it runs across longer parts and repeated cycles.
This abrasive belt is identified as a 4" x 132" edge sanding belt, so it is sized for edge sanding machines that accept a 4 inch wide, 132 inch long loop. The 80 grit specification defines how aggressively the belt cuts, so users can select it when an intermediate cut is needed between coarse shaping and finer finishing. The cloth backing allows the belt to run over contact drums and support plates, which supports consistent tracking under normal edge sanding tension. The aluminum oxide grain coats the working surface, so the belt continues to cut along the full perimeter as it cycles around the machine.
This product is categorized as an abrasive belt in the Abrasives|Abrasive Belts class, so it is intended for use on belt sanding equipment in woodworking and related environments. The 4 inch width makes it suited to edge sanding operations where parts are presented vertically or horizontally against the belt face. The 132 inch length supports continuous movement over longer workpieces, which is helpful when sanding doors, panels, or frame components to consistent edge quality. The SurfPrep branding identifies it as part of the SurfPrep abrasive line, so it aligns with shops that standardize on SurfPrep products for sanding tasks.
The 80 grit rating on this SurfPrep edge sanding belt sets it in a medium cutting range, so it can remove milling marks while still preparing edges for subsequent finer grits. The aluminum oxide on cloth construction means the abrasive grain is bonded to a cloth backing, so the belt can flex around the machine path while supporting the cutting surface. The cloth backing helps the belt resist tearing under normal belt sander tension, which supports repeatable performance during production runs. The aluminum oxide grain distributes across the belt face, so each section of the loop contributes to the cut as it passes the workpiece. The manufacturer part number SP4132080CAO uniquely identifies this exact configuration, which helps buyers match the same belt again when reordering for consistent sanding results.
This SurfPrep edge sanding belt measures 4 inches wide by 132 inches long, so it is suited to belt sanders designed around that specific loop size.
The SurfPrep 4 x 132 edge belt is 80 grit, so it provides an intermediate cut that can both remove stock and prepare edges for finer sanding steps.
This SurfPrep belt uses aluminum oxide abrasive, so the cutting surface abrades edges consistently along the belt path during sanding operations.
The SurfPrep 80 grit belt uses a cloth backing, so the belt can flex around rollers while supporting the abrasive during continuous edge sanding.
This SurfPrep belt is identified by manufacturer part number SP4132080CAO, so shops can reference that code when matching the same belt later.
This SurfPrep belt is in the Abrasives|Abrasive Belts product class, so it fits into a standard abrasive belt selection for sanding equipment.
The SurfPrep 80 Grit 4" x 132" Edge Sanding Belt Aluminum Oxide on Cloth combines a 4 inch width, 132 inch length, and 80 grit aluminum oxide on a cloth backing, so it fits edge sanding applications that need medium-cut performance. By choosing this specific SurfPrep belt, shops can standardize on a repeatable edge sanding setup that matches the same size, grit, and construction each time a replacement belt is needed.
Sold In: 1 Each