Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep 100 Grit 4 x 132 Edge Sanding Belt gives you a 4 inch wide by 132 inch long belt that fits edge sanding setups sized for this format, so you can cover a full edge pass without multiple strokes on the same area. The 100 grit rating positions this belt for general-purpose stock sanding and finish prep where a medium cut is needed, helping you level surfaces without leaving an overly coarse scratch pattern. Aluminum oxide on the belt provides the cutting surface that does the actual abrasion, so you get a steady, predictable cut on typical edge sanding work. The cloth backing supports that abrasive layer, giving the belt structure during use so it tracks properly on edge sanding equipment.
This SurfPrep 100 Grit 4 x 132 Edge Sanding Belt uses a defined 4 inch by 132 inch format, so it is intended for edge sanding machines and setups that are specified for that exact belt size. The continuous loop design of an abrasive belt means the full length of the belt cycles across the work area, so this 132 inch length distributes contact over a longer run during use. The 4 inch width presents a consistent sanding path along the edge, which supports repeatable tracking once the belt is tensioned on the machine according to its 4 x 132 layout. The cloth-backed aluminum oxide construction stays as one integrated belt, simplifying handling when positioning it on appropriately sized abrasive belt equipment.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt, identified by manufacturer part SP4132100CAO, is part of the abrasive belts category used in edge sanding operations. Its 4 inch width aligns with edge sanding processes that work along the narrow faces of workpieces, so the belt can address the full height of many typical edges in a single pass. The 132 inch overall length is matched to edge sanding machines that call out this specific belt length, allowing the belt to be mounted around the machine drums or rollers designed for that format. Because this belt is built as an abrasive belt product class, it serves as the working contact surface that meets the workpiece during edge sanding cycles.
The 100 grit rating on this SurfPrep edge sanding belt defines the aggressiveness of the aluminum oxide abrasive particles, which affects how quickly material is removed and how the surface is left for subsequent sanding or finishing stages. Aluminum oxide on cloth forms the working face of the belt, so each grain on the abrasive side participates in cutting as the belt travels over the edge. The cloth backing supports this aluminum oxide layer, giving the belt the integrity it needs to run through repeated passes in an edge sanding workflow. With the full 4 inch by 132 inch belt using this aluminum oxide on cloth construction, the belt can stay engaged over longer runs while maintaining its defined 100 grit cutting character on edge sanding tasks.
This SurfPrep 100 Grit 4 x 132 Edge Sanding Belt uses aluminum oxide as the abrasive, which provides the cutting surface that contacts the work during edge sanding passes.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt measures 4 inches in width and 132 inches in length, so it fits equipment that is specified for a 4 x 132 abrasive belt size.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt uses a 100 grit abrasive grade, which provides a medium cut suitable for general stock sanding and edge preparation before further finishing steps.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt is aluminum oxide on cloth, so the cloth backing supports the abrasive layer while it runs on edge sanding machines.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt carries manufacturer part number SP4132100CAO, which identifies this specific aluminum oxide on cloth abrasive belt configuration.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt is categorized under abrasive belts, which groups it with other belt-format abrasives for edge sanding and related applications.
The SurfPrep 100 Grit 4 x 132 Edge Sanding Belt combines a 4 inch by 132 inch belt size with aluminum oxide on cloth construction, giving you a defined abrasive belt format for edge sanding machines built around this dimension. The 100 grit rating positions it for medium-cut edge work where material removal and surface preparation both matter. Ordering this SurfPrep belt from Wurth Baer Supply aligns your abrasive choice with a clearly identified 4 x 132, 100 grit aluminum oxide on cloth belt suitable for edge sanding operations that specify this SurfPrep configuration.
Sold In: 1 Each