SurfPrep 180 grit wide sanding belt gives you a fine sanding step that smooths surfaces before finishing, which helps produce consistent, even results across parts. The 37 inch x 60 inch belt size fits wide belt sanding operations that run large panels or continuous parts, so the belt supports efficient throughput in a production setting. Aluminum oxide abrasive on this belt provides a cutting action suited to controlled material removal at 180 grit, which lets you refine prior sanding steps without being overly aggressive. The paper backed construction supports this aluminum oxide layer, creating a sanding belt built for use in wide belt sanding equipment where controlled finish at 180 grit is needed.
This wide belt paper AO 37x60 sanding belt is sized for machines that accept a 37 inch wide by 60 inch long belt, which lets the belt fit properly over the contact drum and idler system. The paper backed construction allows the belt to track around the machine rollers, which supports even pressure along the sanding line. The 180 grit aluminum oxide abrasive on paper is configured as a wide belt, which allows the operator to load it as part of a standard abrasive changeover on compatible 37 x 60 wide belt sanders.
The SurfPrep 37 x 60 sanding belt runs as part of a wide belt sander setup where large panels and components pass under the abrasive. The 37 inch width allows cabinets, doors, or other wide parts to be processed in one pass across the belt, which supports throughput on production jobs. The 60 inch belt length lets the machine maintain a usable wrap around its contact drum and idlers, which helps provide steady contact as the workpiece moves through. The aluminum oxide abrasive bonded to the paper backing performs the actual cutting, which at 180 grit delivers a fine, controlled scratch pattern suitable for steps close to final preparation.
The 180 grit rating on this SurfPrep abrasive belt identifies its position in a sanding sequence, which allows shops to standardize when this step is used between coarser stock removal grits and finer finishing grits. Aluminum oxide on paper backed construction creates a belt that provides consistent cutting behavior at this grit, which supports predictable results from part to part. The wide belt format in a 37 inch x 60 inch size works with machines built for that dimension, which helps keep setup straightforward when switching belts. The combination of SurfPrep branding, 180 grit, and wide belt, paper AO, 37x60 specification allows buyers to match this belt to existing sanding programs that call out SP3760180PAOL or equivalent wording, which supports repeat ordering and consistent surface preparation.
The product is a SurfPrep 180 grit 37 inch x 60 inch wide sanding belt, which serves as an abrasive belt for use in wide belt sanding machines.
The belt uses aluminum oxide as the abrasive material, which provides the cutting surface that performs the sanding action at the 180 grit level.
The wide sanding belt measures 37 inches in width and 60 inches in length, which suits wide belt sanding equipment sized for 37 x 60 belts.
The belt is aluminum oxide on paper backed, which provides a flexible backing that carries the abrasive and allows it to wrap around wide belt sander drums.
The belt is 180 grit, which positions it as a fine sanding step that follows coarser grits and prepares surfaces for later finishing operations.
The manufacturer part number SP3760180PAOL corresponds to a SurfPrep wide belt, paper AO, 37 x 60, 180 grit, which matches the described product configuration.
The SurfPrep 180 grit 37 inch x 60 inch wide sanding belt aluminum oxide on paper backed provides a defined 180 grit step for wide belt sanders, which supports consistent finishing stages. Using the wide belt, paper AO, 37x60, 180 grit configuration in your abrasive lineup allows sanding crews to match a specific SurfPrep belt to jobs that call for this fine grit level on large workpieces, supporting repeatable surface preparation on production runs handled through Wurth Baer Supply.
Sold In: 1 Each