Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep 120 grit 37 x 60 wide sanding belt gives a controlled, medium-fine cut that levels surfaces while preparing them for further sanding or finishing. The 37 inch width and 60 inch length match wide belt sanders that require this belt size, so the abrasive tracks properly and covers the full sanding area in one pass. Aluminum oxide on the belt provides an abrasive surface that cuts efficiently on typical woodworking substrates. The paper backed construction keeps the belt flexible, so it wraps around wide belt drums and platen sections as designed. A lap joint design on the belt creates a continuous loop, which allows the belt to run through the sander in the intended direction without a raised seam at the joint.
This SurfPrep wide sanding belt is specified at 37 inches by 60 inches, which matches machines that run belts of this exact size. The aluminum oxide abrasive on the belt face provides the cutting action, while the paper backed structure lets the belt move around drums in the sanding head. The belt uses a lap joint, so one end overlaps the other, creating a running direction seam that is designed to pass through the sander as a loop. The 120 grit specification sets the abrasive cut level for sanding steps that need a defined scratch pattern.
The SurfPrep 120 grit 37 inch x 60 inch wide sanding belt is sized for wide belt sanders that call for this belt dimension. In a sanding setup, the 37 inch width allows the belt to span the full working width of machines rated for this size, so panels or parts passing through see the same abrasive contact across their width. The 60 inch length is intended for sanders that use this loop length, keeping the belt on the drive and idler drums as designed during operation. Aluminum oxide on the belt surface provides the abrasive point of contact between the belt and the workpiece. The paper backed belt body bends around the sanding drums and contact areas, which supports continuous running around the machine path.
The 120 grit rating on this SurfPrep wide sanding belt defines the scratch pattern the belt creates, so it can be matched to intermediate sanding stages that follow coarser steps. Aluminum oxide as the abrasive material delivers the cutting edges that engage the work surface during these passes. The paper backed construction provides a flexible base for the abrasive layer, which helps the belt follow the drum and platen geometry in a wide belt sander. The lap joint configuration overlaps the belt ends, which forms a directional running joint that is designed to move through the machine as a continuous loop. The specified 37 inch width and 60 inch length work together with the lap joint to keep the belt tracking on equipment built for this exact belt size.
The SurfPrep 120 grit 37 inch x 60 inch wide sanding belt measures 37 inches in width and 60 inches in length, which suits wide belt sanders designed around this belt size.
The SP3760120PAOL SurfPrep belt uses aluminum oxide on the sanding surface, providing the abrasive grains that perform the cutting action during sanding.
The 120 grit on this SurfPrep belt defines a medium-fine scratch pattern, which suits intermediate sanding steps between coarse leveling and finer surface preparation.
This SurfPrep wide sanding belt is paper backed, so the belt body stays flexible as it travels around the drums and contact areas in a wide belt sander.
The 37 inch x 60 inch SurfPrep belt uses a lap joint, which overlaps the belt ends to form a continuous loop that moves through the sander in its running direction.
The SurfPrep part number SP3760120PAOL identifies this belt as a 37 inch x 60 inch aluminum oxide, paper backed, 120 grit wide sanding belt with a lap joint.
The SurfPrep 120 grit 37 inch x 60 inch wide sanding belt aluminum oxide on paper backed design provides a defined combination of belt size, abrasive type, grit, and joint style. When a wide belt sander is built around a 37 inch wide by 60 inch long loop, this belt dimension allows the abrasive to track around the machine as intended. The aluminum oxide layer on the paper backed structure supplies the cutting interface, while the lap joint maintains the continuous loop. For sanding setups needing this specific configuration, this SurfPrep belt gives a clearly defined option.
Sold In: 1 Each