Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Georgian bench support bracket is a wall mounted angle bracket designed to carry bench loads while staying low profile under the seat. The 16 inch long arm and 8 inch height work together to support bench depths when sized correctly to the bench. A low profile inwardly sloped gusset reinforces the bracket so it remains strong while staying visually discreet under the bench surface. Stainless steel construction allows this bracket to serve both indoor and outdoor applications in typical woodworking and construction environments. The 0.25 inch material thickness gives the bracket a substantial structure that resists flex under rated load. Straight and countersunk mounting holes provide options for different fastener heads during installation. With a 500 pound carry capacity per bracket when fastened as described, this support fits benches that must hold significant weight in daily use.
The Georgian wall mounted bench support installs directly to the wall or supporting frame, creating a rigid connection for the bench. This bracket can be installed over tile, stone, and brick when appropriate tools are used to drill the substrate, allowing retrofits in finished spaces. It can also be installed directly to a subframe, which suits new construction or remodels where framing is open. For best structural performance, the bracket is installed into studs, tying the 0.25 inch thick stainless angle back to framing members. Brackets are spaced no greater than 30 inches apart along the bench run, so the 500 pound per bracket carry capacity distributes along the wall. Selecting a bracket size within 4 inches of the bench depth keeps the 16 inch arm properly engaged under the bench surface.
The Federal Brace Georgian bench bracket serves as a structural bench support in both indoor and outdoor environments where stainless steel is appropriate. Its wall mounted angle design suits benches that need clear space below, such as hallway seating, mudroom benches, or similar wall hung layouts. Because the 16 inch length is intended to be within 4 inches of the bench depth, it works well with deeper seating surfaces that need a long bearing arm. The inwardly sloped gusset sits under the seat, so visual focus stays on the bench material rather than the bracket. Being able to fasten over tile, stone, or brick with the proper tools means this bracket can support benches along masonry or finished walls without altering the surface finish more than the mounting locations.
The Georgian bench support bracket relies on several specific details to reach its 500 pound per bracket carry capacity. The 0.25 inch stainless material thickness builds a stiff angle between the 16 inch horizontal arm and 8 inch vertical leg, so the bracket resists bending during use. The inwardly sloped gusset increases the effective section depth, moving material into a position that strengthens the joint without projecting far from the wall. Straight and countersunk 0.26 inch holes give installers options for using flat head or pan head fasteners while still pulling the bracket tight to studs or subframes. Spacing brackets no greater than 30 inches apart allows load to share across multiple supports along a bench run, limiting stress on any single bracket. Using a size that stays within 4 inches of the bench depth keeps the seat well supported along its width so edges do not carry excessive leverage.
The Georgian Bench Support Bracket in this version has a 16 inch length and 8 inch height, so it suits benches where the depth aligns with that arm length for proper under-seat coverage.
The Georgian bench support bracket has a 500 pound carry capacity per bracket when spaced and installed as described, allowing multiple brackets to support heavier benches along a wall.
The Georgian bench support uses a stainless steel finish and is specified for use indoors and outdoors, so it can support benches in exterior or interior locations where stainless is suitable.
The Georgian bench support is intended to be selected within 4 inches of the bench depth, so the 16 inch size suits benches with depths close to that dimension for correct arm coverage.
The Georgian bench support brackets are spaced no greater than 30 inches apart, which helps distribute seating loads across several supports along the bench length.
The Georgian wall mounted bench support can be installed over tile, stone, and brick with the proper tools or directly to the subframe, giving flexibility in new or existing walls.
The Federal Brace Georgian bench bracket in 16 by 8 inch stainless pairs a wall mounted angle design with a 500 pound carry capacity, so it fits benches that must hold substantial loads. Using a bracket size within 4 inches of bench depth brings the 16 inch support arm fully under the seat, while spacing brackets no greater than 30 inches apart builds a continuous support line along the wall. For projects using tile, stone, brick, or open framing, this stainless Georgian bench support offers a consistent mounting approach across different substrates. Select this 30463 model when a stainless, low profile gusset bench bracket aligns with your bench dimensions and mounting surface.
