Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Georgian bench support 14x3x7 stainless is a Federal Brace wall mounted bench bracket designed to carry benches and similar surfaces with a clean, recessed look, so seating structures stay solid without bulky visible supports under the edge.
The Georgian Wall Mounted Bench Support is an angle bracket with a low profile gusset that adds strength while remaining virtually invisible under the bench, which keeps finished seating areas visually clean while still relying on substantial structural reinforcement.
This bench bracket is part of Federal Brace bench brackets, built in stainless steel with a material thickness of 0.25 inches, so the support arm and back plate offer a rigid base that resists flex in typical bench applications.
Each Georgian Bench Support Bracket provides a 500 pound carry capacity when installed into studs and spaced as directed, giving installers a defined load reference for residential or light commercial seating that must feel solid under normal use.
The Georgian Wall Mounted Bench Support is designed as a wall mounted angle bracket that can be installed over tile, stone, and brick with appropriate tools, so it can be fastened through finished masonry surfaces into backing where a bench is required after surfaces are already in place.
The same bracket can be installed directly to the subframe, allowing attachment before finish materials are applied so the support is structurally tied into framing while remaining largely hidden once bench surfaces and cladding are installed over the mounting area.
Installation guidance specifies spacing the brackets no greater than 30 inches apart and into studs for the 500 pound carry capacity, which defines both the maximum on-center distance and the need for structural backing so the published load rating is maintained along the bench run.
The Georgian Bench Support is a bench support bracket in the builders hardware category, suited for applications where a bench projects from a wall and requires hidden structural support, so finished seating can appear to float while still being adequately carried back to framing.
The 14x7 size relates to a bracket arm and height combination that pairs well with benches of similar depth, since selecting a size within 4 inches of the bench depth helps align the support arm near the front of the seat, reducing cantilever overhang beyond the steel.
The inwardly sloped gusset is engineered to give the bracket strength to support nearly any application within its load rating while preserving a clean, aesthetic look, so the gusset contributes to the structural triangle without drawing attention below the bench edge.
Use indoors or outdoors is supported by the stainless steel finish, letting the same bracket serve in interior seating, mudroom benches, or exterior bench runs where resistance to typical environmental exposure is beneficial for ongoing structural performance.
The combination of 0.25 inch thick stainless steel and the angle bracket form means loads from the bench surface are carried back along a rigid path to the wall, which limits deflection at the seat edge and helps finished tops stay level over everyday use.
The guidance to space brackets no greater than 30 inches apart for a 500 pound carry capacity gives a straightforward layout rule, so installers can plan support locations along the wall and match bench framing to those points without guesswork on spacing.
Four or six straight 0.26 inch holes paired with four or six 0.26 inch countersunk holes provide multiple fastening points along both the vertical and horizontal legs, which helps distribute load into the wall and bench structure instead of concentrating stress at a single fastener row.
The ability to mount over tile, stone, and brick with the proper tools supports retrofit or post-finish projects where benches are added after surfaces are complete, so installers can tie back through hard finishes to the subframe while keeping the bracket largely concealed.
The Georgian Bench Support Brackets provide superior support in a clean, aesthetic look according to the web description, meaning the bracket is designed to balance structural performance and visual minimalism so benches can be both functional and refined in appearance.
The Georgian Bench Support is an angle bench bracket that supports wall mounted benches, transferring seat loads back to framing while keeping the bracket low profile under the bench.
The Georgian Bench Support Bracket has a 500 pound carry capacity each when installed into studs and spaced as directed, providing a defined load rating for planning bench support layouts.
The Georgian Wall Mounted Bench Support is specified for use indoors and outdoors, so the stainless steel bracket can serve in exterior or interior bench applications within its load rating.
The Georgian Bench Support should be selected in a size within 4 inches of the bench depth, so the 14x7 size pairs with benches of similar depth for more even support coverage.
Georgian Bench Support brackets are specified to be spaced no greater than 30 inches apart and into studs for the stated 500 pound carry capacity along the bench run.
The Georgian Wall Mounted Bench Support can be installed over tile, stone, and brick with the proper tools, allowing fastening through finished surfaces into the subframe.
The Georgian bench support 14x3x7 stainless from Federal Brace combines a stainless steel angle bracket, low profile gusset, and 500 pound carry capacity to support wall mounted benches, so you can match bench depth, bracket spacing, and mounting surface to this bracket.
With size options of 10x5, 14x7, and 16x8 and the ability to mount over tile, stone, brick, or directly to the subframe, this bench support bracket gives flexibility in layout and timing, letting the bracket serve both pre-finish framing installations and later bench additions.
