Lumiere Lighted Countertop Support For Shelving

Lumiere lighted countertop support combines structural support with Eco-Lucent LED Lighting System for countertop and shelving applications, so one bracket handles both load-bearing and accent lighting in a single installation. The stainless steel sleeve finish with black support bracket creates a defined visual contrast, which adds a distinct design element wherever it is installed. Its low profile look keeps the bracket visually light, so the focus stays on the countertop or shelving rather than the hardware. The Lumiere Illuminated Bracket is designed to allow the maximum amount of leg room under a countertop extension on a bar or island, which helps keep seating areas clear and comfortable. Federal Brace engineers this non-gusseted bracket so it stays out of the way under overhangs, which matters when aligning multiple supports along a run.

Key Lumiere Bracket Details That Support The Job

• The 8x4 size defines an 8 inch support leg with a 4 inch mounting plate, giving installers a clear footprint for planning bracket spacing along countertop or shelving runs.
• The Eco-Lucent LED Lighting System built into the Lumiere adds accent lighting directly at the support location, which reduces separate fixture layout around bar tops, islands, or under-cabinet shelving.
• The stainless steel sleeve over the bracket delivers a luxury finish, so the structural member reads as a finished element on exposed bar faces and island fronts in higher-visibility spaces.
• The black support bracket behind the stainless steel sleeve keeps the structural portion visually recessed, which helps the finish sleeve stand out while the core structure does the load-bearing work.
• The low profile design keeps the support compact under overhangs and shelves, which helps maintain open sightlines and working space along cabinet faces and workstation edges.

Countertop Support Mounting And Fit Details

This Lumiere lighted countertop support uses a mounting plate that extends from the cabinet base under the countertop material, which sets the load path directly from the overhang back into the cabinet or framed structure. The down flange mounts to the cabinet or framed structure after the face material is installed, so finish panels can be applied before final fastening. Two 0.26 inch holes on the flange provide defined fastening points, which simplifies drilling and alignment when securing the bracket. A single 0.50 inch round hole on the bracket offers an additional interface point, which can be used according to the project design and structural requirements.

How This Lumiere Support Works In Use

Where The 8 x 4 Lumiere Support Fits Best

The Lumiere lighted support by Federal Brace is designed for countertop and shelving applications, so it serves in both horizontal work surfaces and storage runs. When installed under cabinets for accent lighting, the Eco-Lucent LED Lighting System provides illumination directly beneath the cabinet line, which highlights backsplash surfaces and work areas. Used on countertop overhangs, the Lumiere adds a sparkle to the cabinet fascia, which visually ties the light line to the front of the cabinetry. The bracket is designed to allow the maximum amount of leg room under a countertop extension, so it fits bar countertops and island countertops where people sit or stand close to the edge. In workstation and countertop bracket applications, this non-gusseted design keeps the area under the overhang open, which matters in tight knee spaces.

Design And Mounting Choices That Reduce Rework

The non-gusseted Lumiere Illuminated Bracket focuses its structure into a clean profile, which simplifies layout when aligning several supports under a long overhang. Its stainless steel sleeve and black support bracket construction separates finish from structure, which helps coordinate visible surfaces with surrounding hardware while the core bracket handles support. The mounting plate extending from the cabinet base under the countertop material creates a predictable reference line, which aids in placing brackets at consistent distances from the cabinet edge. With the down flange mounting to the cabinet or framed structure after the face material is installed, finish panels can be applied to the front without working around protruding hardware, which streamlines finish carpentry. The two 0.26 inch straight holes and one 0.50 inch round hole on the bracket define fastening and interface positions, which supports repeatable drilling patterns across multiple brackets in a run. Material thickness of the 18 gauge sleeve and 0.25 inch bracket establishes the bracket profile, which informs routing, notching, or spacing decisions when coordinating with surrounding millwork.

Common Lumiere Lighted Countertop Support Questions

Selecting This Lumiere Support For Your Project

The Lumiere lighted countertop support pairs structural bracket performance with the Eco-Lucent LED Lighting System, so one component can support and highlight countertop or shelving installations. Its 8x4 size, non-gusseted profile, and stainless steel sleeve with black support bracket finish give cabinet, millwork, and countertop trades a defined, low profile solution for bar tops, islands, and under-cabinet runs. For projects using workstation and countertop brackets where accent lighting and leg room both matter, this Federal Brace Lumiere support from Wurth Baer Supply offers a focused, application-driven option ready to integrate into your layout.