6" x 34-1/2" Anteris Countertop Leg Support, Black Finish

Anteris Countertop Support Leg For Heavy Tops

Anteris countertop support leg is a strong metal support leg in countertop height for supporting overhangs in heavy stone and composite materials, so it carries significant weight where cabinets alone do not. This Federal Brace Island Support Leg is made of 0.25 inch steel, which provides a heavy section that resists bending under load. The 6 inch by 5 inch by 34.50 inch size sets it at typical countertop height while keeping a compact footprint that works well at cabinet ends or island corners. A double steel plate structure provides exceptional countertop carrying strength equal to 200 pounds each, so a single leg can handle a substantial portion of an overhang load. The black finish gives a painted gloss appearance that blends with dark toe kicks and bases, helping the support disappear visually while still doing the structural work.

Key Countertop Support Leg Details For Installers

• The 6 inch by 5 inch by 34.50 inch sizing keeps this leg at standard countertop height while limiting floor footprint, which helps position support exactly under stone or composite overhangs.
• A double steel plate structure delivers countertop carrying strength equal to 200 pounds each, so legs can be spaced to share overhang loads predictably on heavy materials.
• Federal Brace Island Support Legs are made of 0.25 inch steel, giving a thick section that resists flexing and helps counters feel solid when leaned on or loaded at the edge.
• The black painted gloss finish provides a clean, dark appearance that works well under many tops, reducing the need for additional cladding in visible locations.
• The design as a strong metal support leg in countertop height lets it act as a structural post where cabinets stop, extending usable overhang depth on stone or composite tops.

Mounting And Attachment Details For This Leg

The Anteris countertop support fastens to the floor with a countersunk lag screw, so the load is driven directly into the subfloor for maximum support. A bottom plate with a 0.26 inch countersunk hole provides a flat bearing surface while hiding the lag head, which keeps the leg seated and visually clean at the floor. The top plate for attaching under the counter does not have holes and is adhered using silicone or a two part epoxy, which spreads load across the plate without point fasteners. The countertop is attached using a silicone or epoxy adhesive, tying the top and leg together so the steel post and plate carry the overhang weight as a unit.

How This Federal Brace Leg Works In Use

Where This Countertop Support Leg Performs Best

The Web Description identifies the Anteris countertop support leg by Federal Brace as designed for supporting overhangs in heavy stone and composite materials, so it fits applications like stone peninsulas, island extensions, or seating overhangs where weight is concentrated at the edge. The Product Class of workstation and countertop brackets places this leg in work surface and table support roles, which suits kitchen, shop, or commercial tops that need point-load capacity. Federal Brace Island Support Legs are made of 0.25 inch steel, giving each leg substantial stiffness, which is valuable when people lean or sit near the countertop edge. The 6 inch by 5 inch by 34.50 inch size keeps the top plate just under standard countertop height, allowing the leg to align with common cabinet and work surface dimensions for a level run.

Support Details That Improve Countertop Results

A double steel plate structure provides exceptional countertop carrying strength equal to 200 pounds each, so installers can plan leg spacing based on known per-leg capacity when laying out supports under heavy stone or composite overhangs. The bottom plate with a 0.26 inch countersunk hole for a lag screw anchors the leg directly into the floor, which channels the load straight down instead of relying on cabinet framing. The countersunk lag screw design lets the fastener sit below the plate surface, keeping the leg base flat against the floor so it bears evenly across the plate. The countertop is attached using a silicone or epoxy adhesive on the top plate, creating a broad bond that distributes stress instead of concentrating it at a few mechanical points. Federal Brace Island Support Legs in a black painted gloss finish offer a dark structural element that can sit beneath many countertop styles without drawing attention, while the 0.25 inch thick steel construction continues to support the top over time.

Common Questions About This Countertop Support Leg

Choose This Leg For Heavy Countertop Overhangs

The 6 inch by 5 inch by 34.50 inch Anteris countertop support leg in black finish provides a strong metal support leg in countertop height for heavy stone and composite overhangs, using 0.25 inch steel and a double steel plate structure rated at 200 pounds each. Floor fastening with a countersunk lag screw and a broad adhesive-bonded top plate work together to disperse weight for maximum support. For projects needing a compact, black Federal Brace Island Support Leg that ties tops directly into the floor structure, this model offers a clear, load-rated solution.