
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Provencial Hidden Cabinet Bracket installs on top of the cabinets with arms extending under the countertop overhang, creating a floating appearance that keeps support hardware out of sight in finished kitchen or workstation layouts. The bracket is identified by manufacturer part 40112 and belongs to the workstation and countertop brackets product class, so it is built for carrying heavy horizontal surfaces rather than light shelving. The Provencial counter support bracket works with European and standard style base cabinets where routing into cabinets is not an option, allowing installers to avoid cutting into cabinet tops. This hidden bracket should only be used on cabinet bases where 4 inches of the countertop weight is already supported by a cabinet base, so the bracket focuses on supporting the overhang portion instead of the full slab.
The Provencial counter support bracket installs on top of the cabinets, so the horizontal body sits over the cabinet run while the 12 inch arm projects under the countertop overhang. Place the Provencial Hidden Bracket side by side or no more than 18 inches apart on the cabinets to support the overhang of heavy stones, including granite and quartz, which spreads load across multiple brackets instead of concentrating it at a single point. In order to evenly distribute the weight of the overhang, the bracket is installed in two areas and may require additional substructure blocking to tie into, which lets the cabinet run share load with the bracket for better overall support. This hidden bracket works with European and standard style base cabinets where routing into cabinets is not an option, so it suits both frameless and framed cabinet construction styles that rely on flat top surfaces.
The Provencial Hidden Cabinet Bracket by Federal Brace is part of the shelf, closet and garage organization, shelving and accessories category, but its product class is workstation and countertop brackets, positioning it for use under countertops and similar work surfaces. The bracket is described as a counter support bracket that works with European and standard style base cabinets where routing into cabinets is not an option, so it fits installations where the cabinet top must remain intact while still gaining steel support. Place the Provencial Hidden Bracket side by side or no more than 18 inches apart on the cabinets to support the overhang of heavy stones, including granite and quartz, which is useful for kitchen islands, peninsulas, or worktops needing discreet support. This hidden bracket should only be used on cabinet bases where 4 inches of the countertop weight is already supported by a cabinet base, so it is intended to reinforce existing cabinet support rather than replace it. It is also recommended that there is no more than 4 inches of overhang past the tip of the brackets arm, which guides layout decisions around edge distance and helps keep brittle stone within typical overhang limits.
The Provencial Hidden Cabinet Bracket has a size of 36 inch length by 12 inch width by 0.25 inch height, and of that 36 inch length the arms to support the overhang extend 12 inches, giving installers a clear dimension for how far steel extends under the stone. Using brackets side by side or no more than 18 inches apart on the cabinets to support the overhang makes bracket spacing straightforward, so the pattern can be repeated along long runs without recalculating each position. The note that there should be no more than 4 inches of overhang past the tip of the bracket arm directly connects bracket placement to countertop edge layout, which helps coordinate cabinet line, bracket end, and stone profile. The bracket has 4 countersunk holes at 0.26 inch diameter, allowing flush fastener heads that do not interfere with countertop placement and let templates rest flat during fitting. The black powder coat finish on the Provencial Hidden Cabinet Bracket provides a consistent dark surface that visually recedes in most cabinet interiors, so any glimpses during service or undercabinet lighting are less visually distracting. The 0.25 inch material thickness described in the product data indicates a quarter-inch steel section, which contributes to the bracket carrying capacity referenced in the description and supports its role under heavy stones such as granite and quartz.
The Provencial Hidden Cabinet Bracket works with European and standard style base cabinets, so it suits both frameless and traditional framed cabinet constructions that have a flat top surface.
The Provencial Hidden Cabinet Bracket is placed side by side or no more than 18 inches apart, which helps distribute the countertop overhang weight across multiple support points.
The Provencial Hidden Cabinet Bracket has a total length of 36 inches, with a 12 inch arm extending under the countertop overhang, which defines how far steel support reaches beneath the stone.
The Provencial Hidden Cabinet Bracket is recommended for layouts with no more than 4 inches of overhang past the tip of the bracket arm, aligning countertop projection with the bracket reach.
The Provencial counter support bracket is described for supporting overhangs of heavy stones, including granite and quartz, so it addresses common natural and engineered stone tops.
The Provencial Hidden Cabinet Bracket is 0.25 inch thick and has a black powder coat finish, giving a quarter-inch steel section with a dark coated surface.
The Provencial Hidden Cabinet Bracket by Federal Brace provides a 36 inch long, 12 inch arm design that mounts on top of base cabinets, giving concealed support under granite or quartz overhangs. With use on European and standard style base cabinets where routing into cabinets is not an option, it fits many kitchen and workstation layouts using flat cabinet tops. The bracket is placed side by side or no more than 18 inches apart, with guidance of no more than 4 inches of overhang past the arm tip, so layout decisions for heavy stone overhangs can follow clear spacing rules. For projects needing a black powder coat, quarter-inch thick counter support bracket in this size, this Provencial Hidden Cabinet Bracket aligns with those requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB39988 Mfr# 39988 | Countersunk Brace Fastener Kit, Stainless Steel Finish |