Federal Brace Banq Bench Bracket, Raw Steel 8"H x 16"L, 40180

Banq Heavy Duty Bench Support For Fixed Seating

Banq Heavy Duty Bench Support is a steel bench bracket designed to carry built-in seating where wall and floor support are needed together. The 16 inch by 8 inch size establishes a defined span and seat depth, which helps plan locker room, restaurant banquette, or outdoor bench layouts around known support geometry. The 0.50 inch steel construction gives the bracket substantial section thickness, so the support resists flexing under load in permanent seating installations. An inwardly sloped gusset is plug welded between the vertical and horizontal members, tying those legs together, which increases stiffness while keeping the profile visually clean along finished walls. This bracket is part of Federal Brace bench brackets, so it matches other supports in that line where a consistent structural approach is wanted. The 500 pound carry capacity per bracket sets a clear load reference when spacing supports along a run.

Key Bench Bracket Details That Support Your Build

• The 16 inch by 8 inch bracket size defines a predictable projection and drop, which simplifies laying out bench framing and aligning finished seating surfaces along walls or partitions.
• Material thickness of 0.50 inch steel provides a solid structural section, which helps the bracket resist bending in service when supporting heavy seated loads in high-traffic areas.
• The inwardly sloped plug welded gusset ties the legs together, which increases load-carrying rigidity while presenting a clean, sloped profile that suits visible commercial seating installations.
• The mounting plate with six 0.26 inch countersunk holes allows flat-head fasteners to sit flush, which keeps the plate tight to the support structure for a neat finished look.
• Six additional 0.26 inch straight holes offer more fastening positions, which lets installers use through-fastening patterns that match the underlying framing layout for better load transfer.
• The 500 pound carry capacity for each bracket sets a defined structural rating, which helps determine on-center spacing along locker room benches, restaurant banquettes, or outdoor seating runs.
• The unfinished steel construction accepts metal-appropriate paint, which allows the installer to apply a corrosion-resisting and color-matched finish suited to the specific environment.

Bench Support Mounting And Structural Tie-In

The mounting plate on this bench support is designed around six 0.26 inch countersunk holes, so flat-head fasteners can draw the plate tight for a low-profile connection against the wall or framing surface. Six additional 0.26 inch straight holes expand the fastening pattern options, which makes it easier to pick up solid backing or structural members behind finished surfaces. When installing the Banq Bench Bracket, tying into a minimum of 2 inch support structure provides a robust substrate, so the 500 pound per bracket capacity can be used effectively along load paths into the building structure. The 16 inch length and 8 inch height geometry works with typical bench dimensions, which helps align the bracket beneath framing members without awkward shimming or offsetting.

Where This Federal Brace Bench Bracket Works Best

Bench Support Bracket For Demanding Seating Runs

This Federal Brace Banq Bench Support is specified for locker rooms, restaurant banquettes, and outdoor benches, so it is suited to fixed seating where people sit, shift, and stand repeatedly. The 0.50 inch steel thickness partnered with the inwardly sloped plug welded gusset creates a rigid L-shaped support, which manages point loads from seated users into the wall and underlying framing. Its 16 inch by 8 inch dimensions coordinate with common bench depths and riser heights, which lets installers line up supports under framing members for continuous structural paths. The clean, sloped gusset profile keeps the bracket visually simple in open seating areas, which helps it blend under seats in commercial spaces while still carrying the specified 500 pound capacity.

Details That Support Repeatable Bench Installations

The Banq Heavy Duty Bench Support uses a mounting plate with six 0.26 inch countersunk holes and six 0.26 inch straight holes, giving twelve fastening positions that can be matched to available studs, blocking, or masonry anchoring points for consistent installations along a run. Each bracket is made from 0.50 inch steel, so successive supports behave similarly under load, which helps benches feel uniform without soft spots between brackets. The unfinished steel surface is intended to be painted with a metal-appropriate paint, which lets trade professionals apply a coating system that aligns with interior or exterior conditions while also matching surrounding finishes. With a 500 pound each carry capacity, installers can establish bracket spacing from a known rating, which simplifies repeating the same layout pattern across multiple benches in locker rooms, restaurants, or outdoor waiting areas.

Common Questions About This Banq Bench Support

Select This Bench Support For Rated Seating Runs

The Federal Brace Banq Heavy Duty Bench Support pairs 0.50 inch steel with a plug welded inwardly sloped gusset and a 500 pound per bracket rating, giving a defined structural element for fixed benches. Its 16 inch by 8 inch geometry and multi-hole mounting plate streamline layout against 2 inch support structure in locker rooms, restaurant banquettes, or outdoor benches. For projects where a known capacity and consistent bracket behavior matter, this 40180 Banq Bench Support provides a clear basis for spacing and framing decisions along every seating run.