
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Titus Floating Vanity Support Bracket describes a Federal Brace floating vanity bracket designed to mount a vanity cabinet to the wall for a floating vanity installation, which lets you create a wall-mounted bathroom vanity using a bracket built for this purpose. The bracket is a floating vanity support bracket in galvanized steel, so the material resists typical bathroom moisture in normal conditions while providing a solid structural member for the cabinet. The bracket size of 10 x 2 x 18 works with counters designed for a 22 inch depth, giving you a defined geometry to match a standard-depth bathroom vanity layout. The Titus vanity support bracket uses right and left side mounts, which lets you position support on both sides of a base cabinet while keeping the cabinet bottom open. The Federal Brace design is described as a lighter duty bracket, so it is intended to support standard vanities within the stated width and weight guidance instead of oversized or extra-heavy runs.
The Titus Floating Vanity Support Bracket is designed to provide the support strength necessary to wall mount a standard vanity in a bathroom setting, so its role is to carry the combined load of the cabinet and top back to the wall structure. The bracket has 7 straight holes sized at 0.26 inches, giving defined fastening points that work with common fastener diameters when you secure into framing or structural backing. The 18 x 10 x 2 geometry keeps the support under the countertop and along the wall, which leaves open space below the vanity for typical bathroom use. The bracket leaves plenty of room for under mount sinks and pipes, so plumbing can pass beneath and through the cabinet while the support remains tight to the wall and under the counter footprint.
The Titus Vanity Brackets are designed to provide the support strength necessary to wall mount a standard vanity in a bathroom setting, so their primary application is supporting bathroom vanities that are hung from the wall instead of resting on the floor. The Titus floating vanity support bracket is described as a perfect solution for mounting a vanity cabinet to the wall for a floating vanity installation, which places it directly in projects where the visual goal is a clean, open floor line under the cabinet. The bracket leaves plenty of room for under mount sinks and pipes with a right and left side mount, so you can route drains and supplies within the cabinet interior while the supports stay near the cabinet sides. Each support can hold 100 pounds, allowing for granite, quartz, marble, and other natural stones to be mounted along with a base cabinet, which suits many typical bathroom vanity tops used over standard-width cabinets. The 18 inch support arms are designed for 22 inch deep counters, so they work where the countertop depth and cabinet projection follow that dimension, keeping the arm length aligned with the counter overhang. Two arms are required to support up to a 24 inch base cabinet, so a left and right bracket combination serves common single-vanity layouts within that width. The Titus is a lighter duty bracket and is not designed for use in cabinets over 24 inches in width, focusing its use on smaller vanity spans where the single-pair configuration matches the structural intent.
The Titus Floating Vanity Support Bracket size of 18 x 10 x 2 sets a predictable support footprint, so installers know how far the arm projects, how tall the vertical leg is, and how wide the mounting surface runs along the wall when laying out drilling patterns. The material thickness of 11 gauge in galvanized steel provides a solid steel section, which supports the stated 100 pound capacity per support when the bracket is properly anchored to appropriate structure. The use of galvanized steel means the bracket material has a protective zinc coating, which is important in typical bathroom environments where humidity levels are higher than in general living areas. The bracket has 7 straight holes at 0.26 inches, giving multiple fastening positions along the wall side so load can be shared over several anchor points and aligned with available studs or blocking. The right and left side mount configuration means arms are sold individually as right or left, so the installer pairs one of each side to flank a base cabinet and still retain central space below for drains and supplies. The bracket leaves plenty of room for under mount sinks and pipes, which helps keep the structural support clear of standard sink bowls and the path of trap arms and supply lines, reducing layout conflicts within the cabinet. The Titus vanity support bracket is described as a floating vanity bracket for bathroom settings, so the combined characteristics of capacity, geometry, and clearance are tailored to the typical loads and service conditions of a residential or light commercial bathroom vanity rather than to heavier countertops or wider cabinetry.
The Titus Floating Vanity Support Bracket is designed for mounting a vanity cabinet to the wall for a floating vanity installation, so it serves as the structural support for wall-hung bathroom vanities.
Each Titus vanity support can hold 100 pounds, allowing granite, quartz, marble, and other natural stones to be used with a base cabinet within that load for typical bathroom applications.
The Titus support uses 18 inch arms designed for 22 inch deep counters and two arms are required to support up to a 24 inch base cabinet, so it is intended for vanities up to that width.
The Titus bracket is described as a lighter duty bracket and is not designed for use in cabinets over 24 inches in width, so its design targets standard-width bathroom vanities instead of wide or extra-heavy runs.
The Titus Floating Vanity Support Bracket is made from 11 gauge galvanized steel, providing a substantial steel thickness with a galvanized finish suited to typical bathroom environments.
The Titus bracket uses right and left side mounts and arms are sold individually as right or left, so installers can place one on each side of the base cabinet while keeping room for under mount sinks and pipes.
The Titus Floating Vanity Support Bracket by Federal Brace is a floating vanity support bracket built for wall mounting a standard bathroom vanity where a 22 inch deep counter and up to a 24 inch base cabinet are planned. With each support carrying 100 pounds and using an 18 x 10 x 2, 11 gauge galvanized steel body, it offers defined load capacity and geometry for bathroom vanity layouts using granite, quartz, marble, or other natural stones over a base cabinet. For projects matching those dimensions and load expectations, this bracket provides a purpose-built way to create a floating vanity installation using a right and left side mount configuration.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB40325 Mfr# 40325 | Federal Brace Titus Series Floating Vanity Support Galvanized Steel 10" x 2" x 18", - 40325 |