Federal Brace Titus Series Floating Vanity Support Galvanized Steel 10" x 2" x 18", - 40325

Titus Floating Vanity Support Bracket For Wall Mounting

Titus Floating Vanity Support Bracket by Federal Brace is designed to mount a vanity cabinet to the wall for a floating vanity installation, giving a solid structural support point for standard bathroom vanity projects. This floating vanity bracket is a Federal Brace Titus Series floating vanity support, so it is built specifically as a floating vanity bracket rather than a general-purpose angle or shelf support. The bracket size of 18 x 10 x 2 inches sets the reach and height to match common bathroom vanity layouts. The 18 inch support arms are designed for 22 inch deep counters, so the arm projection works with standard counter depths used with base cabinets. Each support can hold 100 pounds, which allows granite, quartz, marble, and other natural stones to be supported along with the base cabinet without overloading the bracket. The bracket is described as lighter duty and is not designed for use in cabinets over 24 inches in width, so it targets smaller floating vanities where this capacity and reach match the application.

Key Federal Brace Titus Bracket Details For Projects

• The Titus Floating Vanity Support Bracket is categorized as a floating vanity bracket, which defines its role as the primary structural support element for a wall-mounted vanity cabinet in a bathroom setting, streamlining layout decisions around the vanity.
• The bracket size of 18 x 10 x 2 inches controls how far the support arm projects and how the vertical section bears on the wall, helping align the bracket geometry to a 22 inch deep countertop and a typical base cabinet profile.
• Each Titus support can hold 100 pounds, so a pair of arms can share the load of a standard vanity base and common stone tops like granite, quartz, marble, and other natural stones, giving clear capacity planning during design.
• The material thickness of 11 gauge galvanized steel provides a substantial steel section for the bracket, which supports the stated carry capacity and offers a robust feel when anchoring a standard bathroom vanity to framing.
• The Titus vanity support bracket has right and left side mount versions and arms are sold individually as right or left, which lets the installer place a dedicated support at each end of the base cabinet while matching the orientation to each wall side.
• The bracket has 7 straight holes at 0.26 inch diameter, giving defined fastening points on both the vertical and horizontal legs so the installer can plan screw type, spacing, and alignment relative to wall studs and cabinet structure.

Floating Vanity Mounting And Bracket Layout

The Titus Floating Vanity Support Bracket is designed as a solution for mounting a vanity cabinet to the wall for a floating vanity installation, so its geometry and hole layout support both cabinet and wall connections. The 18 inch support arms are designed for 22 inch deep counters, which sets how the arm runs under the vanity and counter depth so the load is carried back to the wall. Two arms are required to support up to a 24 inch base cabinet, meaning one right and one left side mount can be placed at each end of a standard-width cabinet to balance the load. The Titus is a lighter duty bracket and is not designed for use in cabinets over 24 inches in width, so layouts can be limited to base cabinets at or under this width range to align with the bracket design intent.

Using The Titus Vanity Bracket In Bathroom Work

Where This Floating Vanity Bracket Fits Best

The Titus Floating Vanity Support Bracket by Federal Brace is described as a perfect solution for mounting a vanity cabinet to the wall for a floating vanity installation, so it is aimed directly at bathroom settings where a wall-mounted vanity is desired. The Titus Vanity Brackets are designed to provide the support strength necessary to wall mount a standard vanity in a bathroom setting, tying the bracket capacity and geometry to typical residential or light commercial vanity use. Each support can hold 100 pounds, which allows granite, quartz, marble, and other natural stones to be mounted with a base cabinet without exceeding the rating of a single arm, giving predictable performance for many stone tops. The 18 inch support arms are designed for 22 inch deep counters, so the arm length lines up under standard-depth counters commonly used over bathroom base cabinets. The design leaves plenty of room for under mount sinks and pipes with a right and left side mount, so plumbing components can occupy the center cabinet space while the brackets carry the load at the sides. Two arms are required to support up to a 24 inch base cabinet, defining a clear bracket count and layout for this cabinet width so the right and left brackets work as a pair at each end.

Details That Support Repeatable Floating Installations

The Titus Floating Vanity Support Bracket has a material thickness of 11 gauge, so the steel section is sized to support the 100 pound per support carry capacity while providing stiffness for a standard vanity load. The bracket uses galvanized steel, giving the Titus floating vanity support a galvanized finish that aligns with the ADA and vanity bracket category and suits typical bathroom environments. The bracket size of 18 x 10 x 2 inches establishes consistent geometry from job to job, which supports repeatable layouts when setting cabinet height and countertop depth. The bracket has 7 straight holes at 0.26 inch diameter, so mounting locations are predefined and evenly spaced for fastening into wall structure and the cabinet or countertop support layer. Arms are sold individually as right or left, allowing a matching right and left side mount arrangement to be repeated across multiple projects while keeping orientation consistent. The Titus is described as a lighter duty bracket and is not designed for use in cabinets over 24 inches in width, which guides selection toward standard-width floating vanities where the pair of brackets and their 100 pound each capacity align with the intended load range.

Common Questions About Titus Floating Vanity Support

Select The Titus Vanity Support For Sized Floating Installs

The Titus Floating Vanity Support Bracket by Federal Brace provides a defined solution for wall mounting a standard vanity in a bathroom setting, using an 18 x 10 x 2 inch galvanized steel bracket rated at 100 pounds per support. The 18 inch arms are designed for 22 inch deep counters, and two arms are required to support up to a 24 inch base cabinet, so layouts with a right and left side mount stay within the lighter duty bracket design. For projects matching this cabinet width, counter depth, and stone top load, this Titus floating vanity support bracket offers clear parameters for planning a floating vanity installation.