Inner Tone edgebanding 3mm describes a 3mm thick PVC edge banding strip that covers and protects exposed panel or board edges. This Rehau, Inc. edgebanding is designed as an edging material in the Edgebanding & Surfacing category, so it finishes raw edges where surfaces terminate. The 1-15/16 inch width gives generous coverage across typical panel thickness plus overhang, helping create a clean transition from face material to edge. The PVC construction provides a uniform, machinable edge that works well in edge banding workflows where synthetic edging is required. A 300 FT length on a single run supports longer production jobs or repeated cabinet and furniture runs without frequent changeover. The 3mm thickness builds a substantial edge profile compared to thinner bands, which supports more defined edge details and consistent machining during trimming and finishing steps.
The 3mm thickness on this Inner Tone PVC edgebanding provides enough material for typical edge banding application and trimming processes, supporting a defined edge once excess is cut back. Its 1-15/16 inch width offers working tolerance when aligning the strip to the panel face, giving space for overhang on both sides so trimming tools can create a flush, straight edge. The 300 FT length is suited to workflows where repeated cuts from one continuous strip are preferred, reducing interruptions during edge banding operations on cabinets, shelving, or similar assemblies. As a PVC edge banding in the Edgebanding & Surfacing category, it fits into standard edging steps where an installer bonds and then trims a continuous band to finish exposed edges.
This Inner Tone edgebanding 3mm is used wherever exposed panel edges need covering with a PVC band, such as along cabinet sides, shelving edges, or furniture components using sheet goods. The 1-15/16 inch width allows it to span the edge of many panel constructions while leaving material for trimming, so it can be applied to vertical or horizontal board edges in a shop environment. As part of the Edgebanding & Surfacing category, it functions specifically as the edging component in assemblies that already rely on surfacing materials, giving fabricators a consistent way to finish raw edges that would otherwise show core material. The 300 FT roll length serves projects that involve numerous pieces cut from larger sheets, supporting continuous use on production jobs where a single tone and profile need to carry through every visible edge.
The 3mm thickness of this Rehau, Inc. PVC edge banding affects how the finished edge feels and machines, providing a more pronounced edge profile compared to thinner bands once trimming is completed. That thickness also supports routing or flush-trimming operations that remove overhang while maintaining enough material for a solid visual line along the edge. The 1-15/16 inch width directly influences how forgiving the installation is, since extra width beyond the panel thickness allows alignment without having to position the strip perfectly on the first pass. After bonding, that extra width becomes controlled overhang that is shaped back to the panel, helping reduce visible misalignment. The 300 FT length contributes to workflow efficiency, enabling many cuts from a single continuous strip so edges throughout a project share the same Inner Tone appearance, thickness, and material characteristics.
This Inner Tone edgebanding is 3mm thick, giving a substantial PVC edge that supports defined profiles and consistent trimming during cabinet and furniture edge finishing.
The Rehau Inner Tone edgebanding strip is 1-15/16 inches wide, providing coverage beyond typical panel thickness so overhang can be trimmed back to a flush, clean edge.
This PVC edgebanding provides 300 FT of continuous material, supporting multi-piece or multi-cabinet projects where a single tone and profile should run across many edges.
This Inner Tone edge banding is made from PVC, giving a synthetic edging suited to machining and trimming in standard edgebanding and surfacing workflows.
The manufacturer of this Inner Tone edgebanding is Rehau, Inc., which allows shops to reference the brand when matching existing PVC edging on repeat work.
Part number 302114-022 identifies this specific Inner Tone 3mm thick, 1-15/16 inch wide, 300 FT PVC edgebanding, helping maintain consistency when reordering for future projects.
Inner Tone edgebanding 3mm gives shops a defined PVC edge solution with a 3mm thickness, 1-15/16 inch width, and 300 FT length for ongoing cabinet or furniture work. As an Edgebanding & Surfacing product from Rehau, Inc., it functions as a dedicated edging material for covering exposed panel edges with a consistent Inner Tone appearance. For fabricators and installers needing repeatable edge treatment on sheet-based projects, this PVC edge banding provides a clearly specified option that aligns thickness, width, and run length for efficient workflows.
Sold In: 1 Roll