Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Inner Tone Light edgebanding gives panel edges a matching Inner Tone Light finish that visually ties into coordinated surfacing, which helps projects look consistent from face to edge. The edgebanding is 3mm thick, so it builds a solid edge profile that stands out clearly on sheet goods and supports a defined transition at doors, drawer fronts, and casework. The 1-15/16 inch width gives coverage across panel thickness with room for trimming, which supports clean straight lines when you flush the banding to the faces. The 300 FT length is supplied on a continuous roll that supports production runs, letting you band multiple cabinets or casework pieces without frequent roll changes. This edgebanding is made from PVC, so it works as a surfacing material within the Edgebanding & Surfacing category for typical cabinet and furniture panel applications.
The 3mm thickness of this PVC edgebanding provides a robust edge that can be trimmed flush while still leaving enough material for a slight profile, which matters when balancing durability with a clean line on cabinet doors or carcasses. With a 1-15/16 inch width, the banding overhangs typical panel thicknesses, giving you working room for trimming equipment while keeping the substrate covered after the cut. Being PVC, the material pairs with other surfacing products in the same Edgebanding & Surfacing category, so it can be integrated where synthetic panel finishes are called out across a project. The 300 FT length supports extended runs, which helps keep color and appearance consistent from panel to panel during installation or shop production.
This Inner Tone Light edgebanding is classified as Edge Banding, so it is intended for use on the exposed edges of sheet goods in cabinet, furniture, or casework builds where a finished edge is needed alongside surfacing materials. The PVC composition fits within the Edgebanding & Surfacing category for applications that rely on synthetic finishes instead of raw substrate, giving you an edge treatment that visually ties into matching Inner Tone Light designs. With its 3mm thick build, the banding works well on cabinet doors, drawer fronts, shelves, and carcass edges where a more substantial edge is preferred rather than a very thin strip. The 1-15/16 inch width helps the product span the full thickness of typical panels, supporting a single pass trimming setup along edges of upper cabinets, bases, or tall units.
The combination of 3mm thickness and PVC material means this edgebanding forms a noticeable edge that can be dressed after trimming to achieve a defined profile, which is helpful when aligning doors and drawer fronts so their edges read uniformly. The Inner Tone Light color ties into matching Inner Tone Light surfacing, so once the edging is applied and trimmed, faces and edges visually coordinate, supporting a consistent look across banks of cabinets or full casework runs. At 1-15/16 inch wide, the banding provides extra coverage beyond the panel edge, so trimming operations can remove minor panel irregularities while still leaving full color coverage at both faces. The 300 FT roll length identified in the description helps maintain color continuity across multiple pieces, because large sections of a job can be completed from a single roll without interruption. The manufacturer part number 302114-117 identifies this exact Inner Tone Light PVC edgebanding, which helps match it across drawings, reorder lists, or when aligning it with related surfacing specified by brand.
Inner Tone Light edgebanding is a PVC Edge Banding product in the Edgebanding & Surfacing category, so it is used to finish exposed panel edges in cabinet and furniture work.
This Rehau PVC edgebanding is 3mm thick, giving a substantial edge profile that supports trimming and light profiling while still covering the substrate on cabinet or casework panels.
The Inner Tone Light edge banding is 1-15/16 inch wide, allowing overhang on common panel thicknesses so trimming leaves a clean, fully covered edge at both faces.
The Inner Tone Light edgebanding roll is 300 FT long, supporting longer cabinet or casework runs so multiple panels can be edged from the same continuous length.
This 3mm Inner Tone Light edgeband is made from PVC, aligning it with other Edgebanding & Surfacing materials used to finish synthetic-faced panels.
The part number 302114-117 identifies this specific Inner Tone Light 3mm thick, 1-15/16 inch wide, 300 FT PVC edgebanding from Rehau for accurate selection and reordering.
Choose this Inner Tone Light edgebanding when a 3mm thick PVC edge is needed to match Inner Tone Light surfacing on cabinet or furniture panels. The 1-15/16 inch width and 300 FT roll length support efficient edging across multiple pieces while keeping panel faces and edges visually coordinated. Using the Rehau manufacturer part number 302114-117 through Wurth Baer Supply connects this exact Edge Banding product to drawings, cut lists, and surfacing selections on your next run.
Sold In: 1 Roll