Craft Elm Edgebanding 24mm x 1mm, 600 FT

Craft Elm Edgebanding 24mm x 1mm For Clean Edges

Craft Elm Edgebanding 24mm x 1mm is a PVC edge banding from Rehau, Inc. that covers exposed panel edges over a 24mm width and 1mm thickness, creating a defined transition between board edges and adjacent surfaces in woodworking projects. The 600 FT length provides a continuous supply for longer runs or multiple cabinets, reducing changeovers during repetitive edge work on job sites or in the shop. Being part of the Edgebanding & Surfacing category positions it for closing off raw panel edges where a matching Craft Elm look is needed across casework and furniture parts. The 1mm thickness gives a measurable layer at the edge, supporting a solid-feeling profile when trimming and flushing to the panel face. As an Edge Banding product, it finishes panel perimeters so raw cores stay covered wherever a finished Craft Elm edge is required.

Key Craft Elm Edgebanding Details That Matter

• The 24mm width spans typical panel thicknesses with room for slight overhang, helping installers trim back to a clean, straight line along the face and back of cabinet parts.
• The 1mm thickness adds a defined edge layer that can be trimmed and flushed without feeling too fragile, supporting consistent edge quality across repeated parts.
• The 600 FT roll length supports extended production runs or multiple smaller projects from one coil, reducing time spent changing rolls during edge banding work.
• The PVC material classification places this in a common edgebanding family for woodworking, supporting familiar machining, trimming, and handling steps in standard shop workflows.
• The Craft Elm identification ties the banding to a specific design look, helping maintain visual continuity across doors, drawer fronts, and carcass edges using that appearance.

Installation Fit For 24mm x 1mm PVC Edgebanding

This Craft Elm Edgebanding 24mm x 1mm, 600 FT is sized to work where a 24mm wide PVC strip is appropriate for covering exposed panel edges. The 24mm dimension gives coverage that extends beyond common panel thicknesses, leaving material for flush-trimming operations on both faces. The 1mm thickness sets expectations for how the edge feels and cuts during trimming, guiding tool setup on edge banding machines or handheld trimmers. As a PVC Edgebanding product in the Edge Banding class, it fits into workflows that bond a thermoplastic strip to panel edges so finished pieces align with Craft Elm surfaces elsewhere in the project.

Using Craft Elm Edgebanding In Woodworking Projects

Where This Craft Elm PVC Edgebanding Is Applied

Craft Elm Edgebanding 24mm x 1mm, 600 FT is positioned for use on exposed panel edges within woodworking projects where a Craft Elm look is specified. The 24mm width suits edges of case sides, tops, bottoms, and shelves that need complete coverage of the core with controlled overhang for trimming. On cabinet runs or furniture components, the 600 FT length supports edging many linear feet of panels with the same Craft Elm appearance so verticals, horizontals, and fronts share a consistent edge finish. As a Rehau, Inc. PVC Edgebanding product categorized under Edgebanding & Surfacing, it fits into assemblies where laminated or surfaced panels require a matching or coordinating edge treatment identified as Craft Elm, helping align edge color and pattern with surrounding surfaces that share this designation.

Why These Dimensions Support Consistent Edge Results

The 24mm x 1mm sizing of this Craft Elm Edgebanding directly affects how edges are processed and finished. With 24mm of coverage, installers have enough width to center the strip on typical panel thicknesses while leaving extra material for trimming on both faces, supporting straight, chip-free edges after cutting flush. The 1mm thickness provides a tangible profile that responds predictably to trimming knives or routers, helping maintain a consistent reveal and feel along every edge. The 600 FT length minimizes roll changes during extended runs, supporting repeatable machine settings over more parts without interruption. Identified by manufacturer part number 315431-052 and sold as a continuous 600 FT edge banding roll, it keeps batch work organized so multiple cabinets or furniture pieces can share the same Craft Elm edge specification across an entire project.

Common Questions About Craft Elm Edgebanding 24mm x 1mm

Select Craft Elm Edgebanding For Matching Panel Edges

Craft Elm Edgebanding 24mm x 1mm, 600 FT from Rehau, Inc. gives a defined 24mm wide, 1mm thick PVC edge solution for projects that call for a Craft Elm identified finish on exposed panel edges. The 600 FT length supports continuous work across cabinets and furniture parts where a consistent Craft Elm edge is specified. For woodworking jobs using this look across panels, this edge banding provides the defined dimensions and roll length needed to keep edge treatment aligned with the Craft Elm designation.