Craft Elm edgebanding 1-3/4 x 1.5mm gives a defined edge treatment for panels that match that width, so cabinet sides, shelves, and casework get a consistent finished edge in one pass. The PVC edgebanding material places a durable surface over exposed panel cores, so cut edges are covered and visually unified with adjacent surfaces. The Rehau, Inc. brand ties this roll directly to a recognized edgebanding manufacturer, so shops can match this material with other Rehau edge treatments on a project. The 1.5mm thickness builds a noticeable edge profile, which helps protect board edges in high-contact areas. The 500 FT roll length supports longer production runs, so installers and fabricators can handle multiple pieces or an entire job with one continuous coil. The Craft Elm description defines the design family, which helps align this edgebanding with related Craft Elm surfacing materials in the shop.
The 1-3/4 inch width on this Craft Elm edgebanding provides coverage that suits panels close to that thickness, so installers can center the strip and trim flush with predictable overhang on each face. The 1.5mm thickness influences trimming and corner finishing, so edge tools remove a manageable amount of PVC while still leaving a sturdy profile at each edge. The continuous 500 FT length supports machine-fed or manual application on long cabinet runs, so operators can set feed tension once and work through multiple pieces without frequent coil changes. The PVC material class matches standard edgebanding processes, so typical edgebanding cutters, trimmers, and scrapers work within expected parameters for this product category.
This Craft Elm edgebanding 1-3/4 x 1.5mm works as an edge finish for panels sized for that width, so cabinet sides, tall panels, and shelving can receive a uniform perimeter treatment. The PVC material is designed as edge banding, so it is suited to covering exposed substrate edges on casework elements. The 500 FT roll length lets production shops queue many parts on an edgebander, so operators can process doors, dividers, and partitions in sequence without changing material mid-run. The Craft Elm identification links this banding to that specific decor family, so when a project uses Craft Elm surfaces, this banding provides a coordinated appearance along every exposed edge.
The Rehau, Inc. branding connects this edgebanding to a large edgebanding manufacturer, so specifiers familiar with Rehau product lines can call out this material with confidence that it matches their chosen Craft Elm design family. The 1.5mm thickness helps define the visual line along door and panel fronts, so the finished edge reads as a deliberate design detail rather than a thin veneer. On vertical cabinetry, this profile can visually frame the panel face, while on shelving it adds a robust leading edge that stands up to daily contact.
The 1-3/4 inch width and 1.5mm thickness together define how this Craft Elm PVC edgebanding sits on typical cabinetry substrates, so setup on edgebanding machines can be dialed in around those precise measurements. The consistent width helps hold a steady reference against panel faces, which supports straight, parallel glue lines along the length of each component. The 1.5mm PVC thickness creates enough material for radius trimming without exposing the core, which supports cleaner corners and reduces touch-up work after machining.
The 500 FT roll format allows longer continuous feeds, which can reduce splices along extended pantry sides, tall closet panels, or banked cabinet runs. With fewer changes between coils, line operators can maintain a consistent feed speed and heat profile, supporting more uniform edges across an entire batch. The PVC edgebanding classification also aligns with common shop tooling, so cutter heads and trim stations designed for PVC edge banding operate within their usual ranges when working with this 1.5mm material.
This Craft Elm edgebanding is PVC edgebanding, which provides a dedicated edge treatment for panels and casework, giving exposed cores a covered and unified look with the selected decor.
The Rehau 333802-002 Craft Elm edgebanding roll is 500 FT long, allowing extended cabinet or panel runs to be processed from a single coil during production.
This Rehau Craft Elm PVC edge banding is 1-3/4 inches wide and 1.5mm thick, giving coverage for panels near that thickness and a substantial edge profile after trimming.
The 1.5mm thickness supplies enough PVC for radius trimming and corner shaping, so finished edges retain a solid feel while still machining cleanly.
The Craft Elm description identifies the decor family for this edge banding, helping match its appearance with Craft Elm surfacing used on cabinets or panels.
This 1-3/4 x 1.5mm edgebanding is manufactured by Rehau, Inc., linking it to a recognized producer of PVC edge banding materials.
Choosing this Craft Elm edgebanding 1-3/4 x 1.5mm, 500 FT from Wurth Baer Supply aligns cabinet and panel edges with a defined Rehau decor family. The PVC edge banding format, precise width, and substantial 1.5mm thickness support consistent results on casework runs that call for Craft Elm styling across visible edges.
Sold In: 1 Roll