Brite White edgebanding from Rehau, Inc. is PVC edge banding that finishes exposed panel edges on cabinets and casework, so raw board edges present a consistent bright white appearance along the entire run. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving room to trim flush without exposing the core material. The .018mm thickness provides a thin, workable edge that follows panel lines closely, which supports a neat transition between face and edge surfaces. Supplied in a 600 foot length, the roll format supports longer production runs and fewer changeovers on edgebanders. As part of the Edgebanding & Surfacing category, this PVC edge banding integrates into typical woodworking shop workflows focused on laminate and panel surfacing. Identified by manufacturer part number 301574-635, it aligns with ordering and reordering needs where matching part numbers to past projects keeps appearance consistent.
The 15/16 inch width of this Brite White PVC edgebanding provides coverage across typical panel thicknesses used in cabinetry and casework, giving installers enough material to flush-trim both faces. The .018mm thickness keeps the edge band lean, which supports a clean visual line where the edge meets the panel surface. As edge banding within the Edgebanding & Surfacing category, it fits into standard panel preparation steps, from cutting and machining panels through to applying a finished edge. The 600 foot length per roll gives shops a defined amount of coverage for job planning, aligning material usage with run lengths on their edgebanding equipment.
This Brite White edgebanding is part of the Edgebanding & Surfacing class, so it is applied to exposed edges of panels where a bright white finish is desired on cabinetry, fixtures, or other casework. The 15/16 inch width lets installers cover the full thickness of common sheet goods with margin for trimming, supporting precise edge finishing along doors, drawer fronts, and carcass components. Its PVC composition aligns with typical shop environments that process engineered panels, fitting into workflows that pair edge banding with laminate or other surfacing materials. With a 600 foot roll length, this product supports multi-piece runs, so repeated parts across a project carry the same Brite White edge tone.
The combination of .018mm thickness and 15/16 inch width in this Rehau, Inc. edge banding gives installers a manageable profile that trims cleanly after application, which helps maintain straight, uniform lines along cabinet and panel edges. The Brite White color creates a continuous visual band around components, tying face and edge together for a single finished appearance in bright white projects. Listing this product as PVC edge banding in the Edgebanding & Surfacing category confirms its role as a finishing layer on panel edges rather than a structural element, keeping expectations focused on visual and surface results. The manufacturer part number 301574-635 and SAP description 15/16X.018 BRITE WHITE PVC 600FT provide clear identifiers when matching material to drawings or repeat jobs, reducing variation when the same bright white edge is required across multiple runs.
Brite White edgebanding has a 15/16 inch width and .018mm thickness, giving coverage over typical panel thickness with a thin edge layer that trims back to a clean finished line.
The 301574-635 edgebanding roll is 600 feet long, supporting longer cabinet or casework runs where consistent bright white edges are needed across multiple parts.
This 15/16 PVC edgebanding is made from PVC, placing it within standard edge banding materials used in woodworking shops for finishing panel edges.
This Brite White PVC edge banding is used on exposed panel edges in cabinetry, fixtures, and other casework where a bright white finished edge is required.
The .018mm thickness creates a thin edge profile that follows the panel surface closely, helping the finished edge feel smooth while maintaining the bright white appearance.
The 15/16 inch width provides enough coverage over common panel thicknesses, so installers can trim both faces back to a clean edge without exposing the core.
This Brite White edgebanding from Rehau, Inc., identified as 301574-635 with a SAP description of 15/16X.018 BRITE WHITE PVC 600FT, combines 15/16 inch width, .018mm thickness, and a 600 foot roll length to support panel edge finishing in bright white cabinetry and casework. As PVC edge banding in the Edgebanding & Surfacing category, it fits into established shop processes focused on bringing raw panel edges up to the same visual standard as the surfaced faces. For projects built around a bright white look, selecting this edge banding keeps edges and faces working together visually from part to part.
Sold In: 1 Roll