PVC brite white edgebanding from Rehau, Inc. provides a PVC edge banding solution for covering raw panel edges on cabinetry and similar projects, so exposed cores are concealed and edges present a uniform brite white finish across the run. The 15/16 inch width gives coverage across standard panel thicknesses with margin to trim, helping installers align the band and then flush-trim without leaving gaps. The .018 inch thickness keeps the edge band low profile on the panel, so edge build is minimized while still creating a defined finished edge. The 600 ft length supplies continuous material for longer runs or multiple jobs, reducing roll changes during production. As a PVC edge banding in brite white, this product supports consistent color along all treated edges, which matters when matching visible cabinet or furniture components in repetitive work.
This PVC brite white edgebanding measures 15/16 inch in width, which provides edge coverage across typical panel thickness with extra width available for trimming to a flush finish. The material thickness of .018 inch keeps the band relatively thin on the substrate, so the finished edge does not stand far off the panel surface during routing or scraping. With a continuous 600 ft length, this edge band roll supports uninterrupted edging of multiple cabinet components or longer workpieces, which helps maintain consistent appearance from part to part.
This PVC brite white .018 inch thick edgebanding in 15/16 inch width by 600 ft is suited to edge finishing tasks where raw panel edges need coverage with a brite white PVC strip. The width allows coverage across commonly used panel thicknesses while leaving material to trim, which is useful for cabinet sides, shelves, and similar casework elements. Its brite white color supports use on projects where light-colored faces or interiors are desired, allowing the edge treatment to stay visually aligned with white or light-toned surfaces. As an edge banding product categorized under Edgebanding & Surfacing and Edgebanding, PVC, it plays a role wherever a PVC-based edge finish is preferred over exposed substrate edges. The extended roll length allows the same material to be run across multiple components within a job, supporting visual continuity on cabinet runs or furniture pieces.
The .018 inch thickness of this Rehau, Inc. PVC edgebanding creates a modest build at the edge, which can help produce a clear boundary line without adding excessive bulk, making trimming and cleanup more controlled. The combination of 15/16 inch width and .018 inch thickness means the strip offers enough material to align and trim while still handling like a conventional thin PVC band, supporting predictable cutting and shaping at the edge. With 600 ft provided on the roll, the same brite white material can be applied across many parts in one sequence, supporting visual consistency along all treated edges in a project. Identified by manufacturer part number 301574-657, this specific configuration can be selected again whenever the same thickness, width, color, and roll length are required to repeat previous results.
This PVC brite white edgebanding is 15/16 inch wide, .018 inch thick, and supplied in a 600 ft length, so it covers typical panel edges with extra material for trimming across multiple parts.
The .018 inch thickness keeps the edge band relatively thin on the panel, so the transition from face to edge stays subtle while still defining a clean, finished border.
The 15/16 inch width provides coverage across common panel thicknesses with slight overhang, so installers can trim back to a flush, straight edge on cabinet or furniture components.
The 600 ft roll length supplies extended footage in a single roll, so multiple cabinets or furniture parts can be edged with the same brite white PVC without frequent roll changes.
This brite white PVC edgebanding is produced by Rehau, Inc., so shops can reference that brand and the 301574-657 number when repeating or specifying this material.
Part number 301574-657 identifies this specific Rehau PVC edgebanding configuration, tying together its brite white color, .018 inch thickness, 15/16 inch width, and 600 ft length.
This edgebanding, PVC brite white .018 inch thick in 15/16 inch width by 600 ft, provides a defined set of dimensions and color for finishing raw panel edges. The combination of Rehau, Inc. branding, 301574-657 part identification, and PVC brite white finish supports repeat use wherever this edge look and size have been established on cabinetry or furniture projects. When a job calls for PVC edge banding in brite white with a 15/16 inch by .018 inch profile on a 600 ft roll, this product aligns those requirements into a single, ready-to-apply option.
Sold In: 1 Roll