MESH edgebanding .018mm thick from Rehau, Inc. finishes exposed panel edges so raw board is covered and visually tied into the pewter mesh design. The .018mm thickness creates a low-profile edge, useful when a subtle transition from surface to edge is preferred on cabinets or casework. The 15/16 inch width works with common 3/4 inch panels, giving enough coverage to trim for a flush, professional edge. PVC construction provides a uniform surface along the length, supporting consistent trimming and finishing results on repetitive jobs. The pewter MESH pattern lets the edge follow a coordinated look specified as 15/16X.018 PEWTER MESH PVC 600FT, which helps match drawings and project documentation that reference this description. A 600 FT length supports longer production runs, so installers and shops can run multiple cabinets or components before changing material.
This 15/16 inch PVC edgebanding is sized to cover typical 3/4 inch substrates with extra margin, which helps when aligning tape on panels before trimming. The .018mm thickness keeps the banding slim, so trimming equipment can cut flush to the surface without removing excessive material. PVC edge banding works with common edge banding workflows on cabinets and furniture, allowing the installer to match the pewter MESH appearance around exposed sides. The 600 FT run length supports setting up an edgebanding station once and processing multiple pieces, which is useful in shops handling several cabinets or panels with the same specified finish.
The Rehau, Inc. MESH edgebanding .018mm thick, 15/16 inch width x 600 FT, fits projects where exposed panel edges need coverage that coordinates with a pewter mesh look. By using edge banding described as 15/16X.018 PEWTER MESH PVC 600FT, shops can align with specifications that call for this exact description on drawings or ordering sheets. The 15/16 inch width suits many cabinet sides, doors, and shelving pieces built from 3/4 inch material, allowing the banding to fully cover the core edge before trimming. Because it is an edge banding in the Edgebanding & Surfacing category, it supports finishing cabinet and furniture components so raw board is not visible on front-facing edges. The continuous 600 FT length enables multiple units in a run to share the same MESH pattern, which keeps visual alignment consistent across a project.
The .018mm thickness of this edge banding keeps a slim profile that helps trimming and finishing steps produce a neat edge, since there is less material height to reduce at the corner. PVC construction provides a uniform structure along the 600 FT length, so cutting and trimming tools encounter the same material from start to finish, supporting predictable passes on repetitive work. The 15/16 inch width gives tolerance for slight placement variation before trimming, which helps maintain coverage over the substrate while still achieving a flush final edge. Identifying the product by Manufacturer Part # 301674-869 allows shops to reorder the same pewter MESH PVC banding when repeating jobs or expanding existing installations. The Web Description and SAP Description both call out MESH and PEWTER MESH PVC, which helps match this roll to documentation and job folders that use those terms.
The MESH edgebanding is 15/16 inch wide, giving coverage beyond typical 3/4 inch panels so the edge can be trimmed back to a clean, flush finish.
The edge banding is supplied in a 600 FT length, which supports longer cabinet or panel runs using a single continuous material for consistent appearance.
The .018mm thickness creates a slim band, so trimming tools remove minimal height at the edge, helping achieve a smooth transition between face and edge.
This 15/16 inch edge banding is PVC, providing a consistent man-made surface along the length for predictable cutting and trimming on cabinet components.
The pewter MESH design ties the edge visually to surfaces calling for a similar mesh look, which helps maintain a coordinated appearance on finished cabinets.
Part number 301674-869 identifies this specific 15/16X.018 PEWTER MESH PVC 600FT edge banding, helping shops reorder the same product for repeat work.
This MESH edgebanding .018mm thick, 15/16 inch width x 600 FT from Rehau, Inc. pairs a pewter MESH look with PVC construction for consistent cabinet and panel edges. The 15/16 inch width and slim thickness work well with common 3/4 inch substrates, supporting clean trimming and a finished edge that matches project descriptions calling out 15/16X.018 PEWTER MESH PVC 600FT or Manufacturer Part # 301674-869. For runs where a unified pewter mesh-style edge is specified, this single 600 FT roll keeps work aligned to that design across multiple components.
Sold In: 1 Roll