MESH edgebanding 3mm starts with a PVC edge banding strip designed to cover and protect exposed board edges, so raw substrates are concealed and panels present a finished appearance along every side. The 3mm thickness provides a substantial edge profile, which supports a more robust visual transition between faces and edges on casework or furniture runs. The 15/16 inch width is sized to span common panel thicknesses while giving margin for trimming, which helps installers achieve a tight, flush edge without leaving exposed core material. The pewter mesh design defines the surface look of the banding, giving panels a coordinated edge treatment wherever this tone and pattern are specified in a project. The 300 ft length is suited to longer production runs or multi-cabinet installations, allowing multiple components to be banded from a single roll for consistent appearance across the job.
The 3mm thickness of this PVC edgebanding establishes how far the edge stands proud from the substrate before trimming and finishing, which affects the feel and profile of doors, drawer fronts, and panels. The 15/16 inch width defines how much edge coverage is available across the panel thickness plus overhang, so operators can trim back to a clean line on both faces without risking edge exposure. The 300 ft roll length determines how many linear feet of edge can be processed in one setup, which is useful when planning runs of cabinet components or casework parts that share the same pewter mesh finish.
This MESH edgebanding with a 3mm thickness and 15/16 inch width from Rehau, Inc. is suited to situations where panels in a project require a defined PVC edge in a pewter mesh tone. The width is intended to cover the edge of sheet goods used in cabinetry or similar assemblies, so exposed core is concealed once the strip is applied and trimmed. Because the banding is PVC and classified as edge banding, it fits into standard edgebanding processes used in woodworking shops, allowing operators to process the strips using familiar edge banding equipment settings for this thickness. The pewter mesh surface appearance supports projects where that specific description is called out in drawings or finish schedules.
The 3mm thickness gives installers and production teams a defined material dimension to set up trimming and edge-processing equipment, which supports consistent results from part to part once the machine is dialed in for this profile. The 15/16 inch width provides known overhang relative to common panel thicknesses, so operators can feed parts confident that there is enough material to trim back to a clean, flush edge without leaving gaps. The 300 ft roll length allows planners to calculate total linear edge capacity for a batch of doors or panels in advance, which helps in sequencing work so all related parts receive the same pewter mesh edge in a single production run. Being identified as PVC edgebanding keeps this product aligned with established expectations for how PVC edge materials handle in shop environments and on typical edge banding machines.
This MESH edgebanding is 3mm thick, 15/16 inch wide, and supplied in a 300 ft length, so edge-processing setups can be based on these fixed dimensions for planning and trimming.
The pewter mesh strip is PVC edgebanding, which places it within common PVC edge banding workflows used for cabinet and panel edge finishing operations.
The 3mm thickness creates a more substantial edge profile, which influences the visual and tactile transition between panel faces and the finished edge band.
The 15/16 inch width covers the edge of typical panels with extra material for trimming, helping installers achieve a flush finish on both faces after processing.
The 300 ft roll length supports extended edge runs, allowing multiple cabinet or panel components in pewter mesh to be processed from a single continuous strip.
Rehau part number 301021-579 identifies this specific 3mm thick, 15/16 inch wide, pewter mesh PVC edgebanding in a 300 ft length for ordering and project documentation.
This MESH edgebanding 3mm thick, 15/16 inch width x 300 ft from Rehau, Inc. provides a PVC edge banding solution in a defined pewter mesh appearance for panel and cabinet work. The combination of 3mm thickness, 15/16 inch width, and 300 ft roll length gives installers and shops clear dimensional data for planning edge-processing setups and job quantities. For projects calling for a pewter mesh PVC edge in this size range, this product aligns the specified tone, material, and dimensions in a single roll, supporting consistent results across related parts.
Sold In: 1 Roll