Camel Elm edgebanding gives panel and cabinet projects a matching edge in a Camel Elm tone, so raw sheet edges are covered and the finished piece presents a continuous surface. This edge banding is made from PVC, which forms a uniform, machinable strip along the edge and supports clean trimming on standard edgebanders. The width is 15/16 inch, so it covers typical 3/4 inch board edges with margin for flush trimming on both faces. The material thickness is .018mm, creating a slim edge that blends closely with laminated faces for a neat transition line. A 600 FT length provides a continuous run for multiple cabinets or longer production jobs, reducing mid-project changeovers and supporting consistent color from part to part.
This edgebanding is 15/16 inch wide, so it overhangs standard panel thickness during application and can be trimmed back to a flush edge in one pass. The .018mm thickness keeps the finished edge slim, which helps maintain a clean seam line along the panel. With 600 FT on a roll, applicators can run extended lengths on automatic or manual equipment without frequent roll changes, which supports steady workflow on larger cabinet or shelving sets.
This Camel Elm edgebanding is used wherever sheet material needs a matching edge in a Camel Elm tone, so cabinet carcasses, shelving, and casework can present a finished perimeter. The 15/16 inch width provides coverage for vertical cabinet sides, horizontal shelves, and similar panel edges, giving room for slight placement variation before trimming. The PVC material allows the band to follow straight edges typically found in cabinetry and furniture components. With 600 FT available, shops can run a series of cabinets or storage units in the same Camel Elm look, so door openings, shelves, and exposed sides share a consistent edge color across the project.
The .018mm material thickness produces a low-profile edge, which supports repeatable trimming because knives or milling heads remove only a small amount of PVC when flushing to the face. The 15/16 inch width gives a predictable amount of overhang on common substrate sizes, so setups for trimmers and scrapers can stay consistent from part to part. Because this roll provides 600 FT of the same 302164-540 specification, production runs can maintain the same Camel Elm appearance without mixing batches, which helps installed cabinets and panels align visually when placed side by side.
This Camel Elm edgebanding is made from PVC, which gives a uniform, workable edge that responds predictably to cutting, trimming, and standard edgebanding equipment.
The Camel Elm edgebanding is 15/16 inch wide, providing coverage past typical 3/4 inch panels so the excess can be trimmed back flush on both faces.
This Rehau PVC edgebanding has a thickness of .018mm, creating a slim edge profile that blends closely with laminated or surfaced panels.
The Camel Elm edge banding roll is 600 FT long, supporting multiple cabinets or larger panel runs from a single continuous supply.
Manufacturer part number 302164-540 identifies this specific Camel Elm PVC edgebanding from Rehau, linking future orders to the same size and appearance.
This PVC edgebanding is used on exposed panel and cabinet edges, so casework, shelving, and similar components gain a finished Camel Elm edge.
This Rehau Camel Elm edgebanding pairs a .018mm PVC construction with a 15/16 inch width and 600 FT length, giving woodworking shops a defined way to finish panel edges in a matching Camel Elm tone. Use this 302164-540 edge band when a consistent Camel Elm edge is needed across cabinets, shelving, or other panel-based projects.
Sold In: 1 Roll