Camel Elm edgebanding from Rehau, Inc. is a PVC edge banding designed to cover and protect exposed panel edges over long runs. The 1mm thick, 15/16 inch wide profile gives enough coverage to hide substrate edges while delivering a consistent finished look along casework and furniture parts using Camel Elm surfaces.
The 600 FT length supports extended production or multiple small projects from a single coil, helping keep edge appearance uniform across cabinet doors, shelves, and other components that share the same finish. As part of Wurth Baer Supply's edgebanding and surfacing offering, this PVC edgebanding fits into standard woodworking workflows where a matching Camel Elm edge detail is required on engineered panels.
The defined width and thickness simplify setup on edgebanders and hand-application jigs, because installers can adjust guides and cutters to a repeatable, known dimension. The material and color identity tie directly to Camel Elm layouts, supporting visually consistent runs across a job.
This PVC edgebanding is specified at 15/16 inch width and 1mm thickness, so installers can set edgebander guide fences and trimmers to these known dimensions for repeatable results. The width offers coverage with a controlled overhang on common panel thicknesses, which supports efficient trimming back to a clean, flush edge. The 1mm thickness provides a defined material face for cutting, scraping, and light profiling without losing the Camel Elm finish during normal edge-processing steps.
Across a 600 FT length, shops can run multiple panels or full cabinet sets using one continuous Camel Elm edgebanding source, which helps keep color and edge-thickness appearance consistent from part to part.
This Camel Elm edgebanding is part of the Edgebanding & Surfacing category and is used as edge banding on panels where a Camel Elm appearance is required along exposed edges. The 15/16 inch width and 1mm thickness make it suited for casework, cabinet components, and furniture panels that benefit from covered substrate edges. Installers can run this PVC edgebanding along straight panel sides on production edgebanders or apply it to individual parts in smaller woodworking environments.
The 600 FT continuous length supports building complete room sets, banks of cabinets, or multiple furniture pieces while maintaining the same Camel Elm edge profile across all parts. Because the product is identified as Camel Elm Edgebanding, PVC 1mm Thick, 15/16 inch Width x 600 FT, it aligns with projects that specify PVC edge banding in that exact size and visual family.
The defined 1mm thickness helps cutters and trimmers remove overhang without cutting through the edgebanding, which supports a smooth transition from face to edge. The PVC material is specified in the product name, so shops can plan their tooling and feed speeds around a PVC edge banding rather than other materials.
The 15/16 inch width interacts with typical panel dimensions by providing enough material to cover the full edge while still allowing fine adjustment passes. This width-to-thickness combination lets installers set up their equipment once and run repeat parts, using the consistent Camel Elm surface to keep door, drawer, and panel edges visually aligned. The manufacturer part number 301799-231 ties these dimensions and finish together under a single reorder reference, which helps maintain continuity on future expansions or service work using the same Camel Elm edgebanding.
The Camel Elm edgebanding is 15/16 inch wide and 1mm thick, providing coverage with slight overhang for trimming so panel edges can be finished flush and consistent.
The Camel Elm edgebanding length is 600 FT, which supports longer production runs or multiple projects while keeping edge appearance uniform across all related components.
The Camel Elm edgebanding is PVC, so installers can set tooling, heat, and feed parameters appropriate for PVC edge banding during application and trimming.
This Camel Elm edgebanding is manufactured by Rehau, Inc., giving shops a consistent brand and part number reference for repeat orders on matching projects.
The 1mm thickness provides a defined working layer, allowing edge trimmers and scrapers to remove overhang while keeping the Camel Elm surface intact at the finished edge.
Part number 301799-231 identifies this specific Camel Elm PVC edgebanding with 1mm thickness, 15/16 inch width, and 600 FT length for accurate selection and reordering.
This Camel Elm edgebanding from Rehau, Inc., specified at 1mm thick, 15/16 inch wide, and 600 FT long, is suited for projects requiring PVC edge banding that matches Camel Elm surfaces. Using this defined width and thickness, shops can dial in edgebander or hand-application setups and repeat them across cabinets, furniture, and casework sharing the same finish. For work calling for a consistent Camel Elm edge detail sourced through Wurth Baer Supply, this product provides a clearly defined specification and part number for efficient selection.
Sold In: 1 Roll