PVC Edgebanding, Color 3920P Manitoba Maple with Print, 3mm Thick 15/16" x 328' Roll

PVC Edgebanding Manitoba Maple For Clean Panel Edges

PVC edgebanding Manitoba Maple gives you a color 3920P Manitoba Maple with print finish that covers raw panel edges so the exposed core is concealed and the finished piece matches the face surface. The 3mm thickness adds a substantial edge that can handle typical cabinet and fixture use where a thicker banding is preferred over thin tape. The 15/16 inch width works with common 3/4 inch panel builds, giving a bit of extra material for trimming flush on both faces. The 328 foot roll length keeps longer jobs running without frequent changeover, which supports steady workflow on repetitive cabinet or shelving runs. Doellken Woodtape branding identifies it as part of an established edge banding line, which helps keep finishes consistent when repeating a design standard across multiple projects or shop jobs.

Key Manitoba Maple PVC Edgebanding Work Advantages

• The color 3920P Manitoba Maple with print finish matches Manitoba Maple surfaces, so cabinet and furniture edges visually tie into the panel face for a unified appearance on finished work.
• The 3mm thick PVC construction creates a robust edge profile, so routed or trimmed edges feel solid and substantial on doors, drawer fronts, and shelves in typical woodworking applications.
• The 15/16 inch width gives slight overhang on 3/4 inch panels, so you have enough material to trim flush on both sides and achieve a straight, clean edge line after processing.
• The 328 foot roll format supports longer production runs, so shops can band multiple cabinets, casework sections, or fixture parts without frequent roll changes during a shift.
• The Doellken Woodtape brand and manufacturer part 3920P-1503-1 clearly identify the product, so reorders for the same Manitoba Maple finish can be matched to existing installations.

Manitoba Maple Edge Banding Fit And Handling

This PVC edgebanding in 3mm thickness is suited to standard edge banding equipment that works with 3mm PVC, so it integrates into common cabinet shop banding setups. The 15/16 inch width allows for alignment on panels built from common sheet goods nominally sized around 3/4 inch, so operators can center the tape, then trim the slight overhang to a clean, square edge. The 328 foot roll length feeds through typical edge banders in a continuous run, so operators can process a series of parts without frequent stoppages to change material. The PVC material works with established trimming and scraping routines, so edges can be brought flush and smoothed to match adjacent laminate or woodgrain surfaces.

Using This PVC Edge Banding In Cabinet Work

Where This Manitoba Maple Edgebanding Performs Best

This PVC edgebanding, color 3920P Manitoba Maple with print, serves projects where panel faces carry a Manitoba Maple look and edges need the same tone. The 3mm thick profile supports doors, drawer fronts, and carcass edges in casework where a more substantial edge is preferred for everyday use. The 15/16 inch width suits work based on sheet goods near 3/4 inch thick, so cabinet sides, shelves, and tops can be banded with material that trims neatly without leaving exposed core. The 328 foot roll length supports runs of multiple cabinets or fixtures in a coordinated Manitoba Maple finish, which matters when a job calls for consistent color carry-through from piece to piece.

Why Dimensions And Part Number Support Repeatable Results

The specified 3mm thickness and 15/16 inch width give fixed dimensions, so setup on edge banding equipment can be dialed in once and reused for repeat orders of manufacturer part 3920P-1503-1. The PVC material responds predictably to trimming and scraping, so edge profiles and reveals stay consistent across a production batch of cabinet parts. The clearly defined 328 foot roll length helps plan how many parts can be processed from a single roll, which supports estimating material pulls for casework runs. The exact color designation 3920P Manitoba Maple with print ties finished parts back to a known reference, so replacing or adding cabinets later can use the same edge banding and maintain appearance continuity.

Common Questions About 3920P Manitoba Maple Edgebanding

Choose This Roll For Manitoba Maple Edge Work

The PVC edgebanding Manitoba Maple with print finish, in 3mm thickness and 15/16 inch width, gives cabinet and casework projects a matching edge to Manitoba Maple faces. The 328 foot roll length supports extended runs where consistent color and dimensions across many parts are important. With Doellken Woodtape branding and part number 3920P-1503-1 clearly defining the product, shops can standardize on this edge banding for Manitoba Maple jobs and return to the same specification whenever repeat work is needed.