PVC Edgebanding, Color 3920 Manitoba Maple, 0.018" Thick 15/16" x 600' Roll

PVC Edgebanding Manitoba Maple For Clean Panel Edges

PVC edgebanding Manitoba Maple, Color 3920 Manitoba Maple, gives panel edges a defined finish that visually ties into Manitoba Maple board faces, so cabinet and fixture projects present a consistent look from face to edge. The 15/16 inch width covers common panel thicknesses with a bit of overhang, which supports flush trimming without exposing the core. The 0.018 inch thickness keeps the edge profile slim, which helps when tight reveals or minimal buildup are needed along doors or casework. This Doellken Woodtape edge banding is supplied on a 600 foot roll, so production shops can run long jobs or multiple smaller runs from a single coil, reducing changeovers on banding equipment. The product is classified as PVC edge banding, which suits typical cabinetry and furniture applications that call for a matching synthetic edge.

Key Manitoba Maple Edge Banding Advantages

• The Color 3920 Manitoba Maple tone aligns with KML KMW7911 Manitoba Maple Classic, so edges can visually coordinate with that surface design through runs of doors, drawer fronts, and panels.
• The Color 3920 Manitoba Maple tone also aligns with Wilsonart 7911 Manitoba Maple 60 Matte, which supports projects where that laminate is used on faces and this banding is used to carry the same visual story to edges.
• The 15/16 inch width gives installers coverage past the panel edge, which allows trimming back to a clean line while avoiding chip-out into the laminated face during finishing passes.
• The 0.018 inch thickness keeps the material light and flexible along the edge, which aids handling on curves or corners where a heavier edge might resist following the substrate line.
• The 600 foot roll length supports repetitive workstations and automated banding setups, helping reduce mid-job roll changes and keeping production flow steadier on longer cabinet or fixture runs.

Manitoba Maple Edge Banding Fit And Setup Details

This PVC edge banding in 15/16 inch width and 0.018 inch thickness fits common casework built around Manitoba Maple visual designs, so it can be set up on edgebanders or hand-applied systems that accept PVC tape in that size range. The Manitoba Maple 3920 color match to KML KMW7911 Manitoba Maple Classic and Wilsonart 7911 Manitoba Maple 60 Matte supports aligning edge appearance with those specific decorative surfaces, which simplifies layout decisions at cutting and banding stations. The 600 foot roll format feeds well through continuous banding machinery where longer runs benefit from fewer roll changes, and it also suits shop environments that want one color reference for recurring Manitoba Maple projects.

Using This Manitoba Maple Edge Band In Projects

Where This PVC Edgebanding Manitoba Maple Works Best

This Doellken Woodtape PVC edge banding is aligned to KML KMW7911 Manitoba Maple Classic 3920, so it supports casework, shelving, or fronts that rely on that specific Manitoba Maple Classic design for faces. The banding is also aligned to Wilsonart 7911 Manitoba Maple 60 Matte 3920, which means laminate-based projects using that surface can extend the look around exposed edges. As a PVC edge banding in 0.018 inch thickness, it addresses applications where a slim edge is preferred, such as cabinet doors or drawer fronts where a bulky strip could interrupt tight gaps. The 15/16 inch width is suited to panels that require slight overhang for trimming, which can help edge finishing operations deliver a straight, chip-free line along Manitoba Maple patterned surfaces.

Why These Edge Banding Details Support Consistent Results

The precise Color 3920 Manitoba Maple designation tied to KML KMW7911 and Wilsonart 7911 Manitoba Maple 60 Matte gives finish planners a clear target, which supports consistent edge selection across different batches or jobs. The 0.018 inch thickness helps edgebanding equipment maintain a fine profile, which matters when operators dial in trimming and scraping passes to avoid a noticeable lip at the transition from surface to edge. The 15/16 inch width allows minor alignment tolerance during application, supporting straight tracking along the panel while still leaving enough material to trim without undercutting the decorative layer. With a 600 foot roll length, this edge banding supports repeatable setups on edgebanders, because one coil can run through multiple carcasses or suites with the same Manitoba Maple look before a color change is needed.

Common Manitoba Maple PVC Edgebanding Questions

Select This Manitoba Maple Edge For Matching Runs

This PVC edgebanding Manitoba Maple, Color 3920 in 15/16 inch by 0.018 inch on a 600 foot roll, gives a defined way to carry KML KMW7911 Manitoba Maple Classic or Wilsonart 7911 Manitoba Maple 60 Matte designs across panel edges. For shops planning repeat Manitoba Maple projects, using this Doellken Woodtape edge banding by part number 3920-1518-1 helps keep ordering and setup aligned around one consistent color reference.