Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer Maple Edgebanding defines this product as maple veneer edge banding designed to cover exposed edges, so it finishes raw plywood or panel edges to match maple faces for a more unified cabinet or furniture appearance. The 1-1/4 inch width stated in the description gives enough coverage for thicker panels and slight overhang trimming, which helps installers flush-trim to a sharp, straight edge. The fleece back noted in the product description identifies a backed veneer construction, which supports consistent bonding across the length of the strip for more even adhesion performance. Cedan Inc as the brand links this edgebanding to a dedicated edge banding manufacturer, giving tradespeople a clearly identified source when matching material on repeat jobs. The American veneer maple description ties this banding to maple projects where a maple wood look on the edge is required for visual continuity across doors, drawer fronts, and case edges.
The 1-1/4 inch width noted for this American Veneer Maple Edgebanding gives installers a maple strip wide enough to cover typical board thickness while still leaving enough margin for trimming, which supports accurate, chip-free flush finishing. As edge banding in the edgebanding and surfacing wood category, this product is intended for treating exposed panel edges, so it fits into workflows where cut sheet goods transition from rough cut to edged, ready-for-finish components. The fleece back construction stated in the description adds a backed layer to the maple veneer, which helps the banding follow the length of straight edges with uniform adhesion support. With Cedan Inc identified as the brand, shops can specify this maple edgebanding consistently on drawings or material lists whenever a maple edge detail is part of the design intent.
The category listing as edge banding and the wood edgebanding class define this American Veneer Maple Edgebanding as a finishing material for exposed panel edges, so it fits directly into cabinet, casework, and furniture builds that use maple-faced sheet goods. The 1-1/4 inch width identified in the description suits applications on panel edges where standard thickness plus a small overhang is desired, allowing installers to position the strip, bond it, and then trim back to the exact panel size. Because the product name specifies maple veneer, this banding visually aligns with maple projects, supporting use on cabinet sides, shelving fronts, and door or drawer component edges that need a maple face on all visible sides. The fleece back construction called out in the product data supports edge bonding along long linear runs, helping the banding maintain full contact as it bridges any minor surface variation on the substrate edge. Cedan Inc branding ties the product to a focused edgebanding supplier, which helps shops match this same maple look across multiple areas when they standardize on one manufacturer.
The 1-1/4 inch width stated for this maple fleece back edgeband gives tradespeople enough over-width to position the banding slightly proud of the surface, then trim both faces back to flush, which supports straight, repeatable edges with fewer rework passes. As an edge banding product in the edgebanding and surfacing wood category, this maple strip is purpose-defined for edge finishing rather than broad surfacing, so crews can dedicate it specifically to edge operations in their workflow. The fleece back detail in the description highlights that the maple veneer is supported by a backing layer, which helps maintain stability along the length of the strip during bonding and contributes to more uniform adhesion support across the edge. The American Veneer Maple Edgebanding naming anchors the color and species context as maple, which simplifies material selection when matching to other maple components in a project schedule. The manufacturer part number AEMAPL114-500 provides a precise identifier for ordering and for documenting this specific 1-1/4 inch maple fleece back edgeband in job files, which helps shops repeat the same edge solution on future work.
American Veneer Maple Edgebanding Fleece 1-1/4 inch Width is specified at 1-1/4 inch wide, giving coverage for typical panel thickness with extra material for clean trimming along the edges.
The product is described as American Veneer Maple Edgebanding, so it provides a maple veneer appearance along exposed panel edges for projects that use maple-faced components.
This maple edgebanding is specified with a fleece back, which gives the veneer a backed structure that supports consistent bonding contact along the edge during application.
The brand is listed as Cedan Inc, so the maple veneer edgebanding is supplied under the Cedan Inc name for projects that standardize on that manufacturer.
The product is categorized as edge banding within edgebanding and surfacing wood, placing it as a finishing component specifically for treating exposed edges.
The manufacturer part number AEMAPL114-500 uniquely identifies this 1-1/4 inch American Veneer Maple Edgebanding Fleece, which supports accurate reordering and documentation on job material lists.
Choosing American Veneer Maple Edgebanding Fleece 1-1/4 inch Width provides a maple veneer edge solution sized for common panel work, giving enough width for accurate trimming. The fleece back construction and classification as wood edge banding position this product for edge-focused operations on maple projects. With Cedan Inc identified as the brand and AEMAPL114-500 as the specific part number, shops and installers can specify and order the same maple edgebanding consistently whenever a project calls for finished maple edges.
Sold In: 1 Roll