Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer Maple Edgebanding creates a maple veneer edge that visually finishes exposed board edges, which helps projects read as solid wood in cabinets, fixtures, and furniture. This Cedan Inc edge banding is made as an American Veneer Maple Edgebanding product, so its appearance is based on maple veneer, giving a coherent look wherever a maple face material is used. The 1-5/16 inch width covers common substrate thicknesses with room to trim flush, which supports a neat, square edge profile after machining. This edge banding belongs to the Edgebanding & Surfacing and Edgebanding, Wood family, so it is oriented to wood-based panels and casework rather than metal or composite framing. The fleece back construction on this maple edgeband provides a backing layer behind the veneer, which helps the band conform to the substrate and promotes consistent bonding behavior during application.
The 1-5/16 inch Maple Fleece Back Edgeband width gives enough margin to cover common panel thicknesses while still leaving trimming stock, which supports clean flush routing or knife trimming. Because this product is described as American Veneer Maple Edgebanding Fleece 1-5/16 inch Width, installers know they are working with a maple veneer presentation and a fleece-backed structure, which aligns with typical veneer edgebanding application processes in cabinet shops. As an Edgebanding, Wood product from the Edgebanding & Surfacing category, it is suited to wood panel edge treatment workflows used on cabinetry, shelving, and other casework where a veneer edge is preferred over exposed substrate.
This American Veneer Maple Edgebanding Fleece 1-5/16 inch Width product fits naturally into cabinet and woodworking projects that use maple surfaces, because the maple edgebanding presents a maple veneer edge that visually aligns with maple-faced panels. Its classification as Edgebanding, Wood indicates it is oriented toward wood-based sheet goods, so it suits cabinet sides, shelves, and doors built from panels that benefit from a veneered perimeter. The 1-5/16 inch width accommodates typical panel build-ups with some overhang, allowing fabricators to band edges before trimming to final size. With the maple identification in the 1-5/16 inch Maple Fleece Back Edgeband description, shops can maintain a consistent maple appearance across face and edge areas in the same assembly.
The fleece back noted in the 1-5/16 inch Maple Fleece Back Edgeband description provides a backing layer under the veneer, which assists in forming a stable bond line during the edgebanding process and contributes to predictable adhesion behavior. Because the product is specifically named American Veneer Maple Edgebanding Fleece 1-5/16 inch Width, operators can set up their edgebanding or manual application processes around a known veneer-and-fleece structure instead of a solid plastic profile. The 1-5/16 inch width allows consistent edge coverage even when panel dimensions vary slightly, giving room to trim flush while keeping the glue line near the center of the edge. Identifying the product by the manufacturer part number AEMAPL1-516-500 lets shops record exact usage and reorder the same Cedan Inc maple edgebanding configuration, which helps maintain visual continuity on multi-phase or repeat installations.
The American Veneer Maple Edgebanding presents an American Veneer Maple face, which lets cabinet and woodworking projects carry a maple look across exposed panel edges.
The American Veneer Maple Edgebanding Fleece 1-5/16 inch Width has a 1-5/16 inch width, giving coverage beyond typical panel thickness so edges can be trimmed cleanly after bonding.
The 1-5/16 inch Maple Fleece Back Edgeband uses a fleece back, providing a backing layer that supports adhesive bonding and accommodates minor substrate variations during application.
This maple edgebanding is classified as Edgebanding, Wood in the Edgebanding & Surfacing category, positioning it for wood-based cabinet, furniture, and casework edge treatment.
The American Veneer Maple Edgebanding Fleece 1-5/16 inch Width is a Cedan Inc product, giving shops a consistent brand reference for repeat orders and job specifications.
The manufacturer part number AEMAPL1-516-500 identifies this specific Cedan Inc American Veneer Maple Edgebanding Fleece 1-5/16 inch Width, linking project documentation to the exact maple edgeband used.
The American Veneer Maple Edgebanding Fleece 1-5/16 inch Width from Cedan Inc offers a maple veneer face with a fleece back in a 1-5/16 inch width, giving woodworking and cabinet shops an edge treatment that aligns with maple-faced panels and standard edgebanding workflows.
Sold In: 1 Roll