Peeperdust Edgebanding, PVC 3mm Thick, 15/16" Width x 300 FT

Peeperdust Edgebanding For Finished Panel Edges

Peeperdust edgebanding is a PVC edge banding strip sized at 3mm thick and 15/16 inch wide, so it covers standard 3/4 inch panels with enough overhang for trimming and a clean, finished edge on casework and shelving. The 300 FT roll length keeps a continuous color run available across multiple cabinets or long production runs, which helps panels match from unit to unit on the job. The material is PVC, giving the banding a consistent profile that responds predictably to common edgebanders and trimming tools in a cabinet shop. This product is identified by manufacturer part number 301373-009 from Rehau, Inc., so it can be specified or reordered with the same color and size when matching existing work. As part of the Edge Banding category, it fits into standard woodworking workflows wherever raw panel edges need a finished PVC band.

Key Peeperdust Edgebanding Details For Jobs

• The 15/16 inch width spans a 3/4 inch substrate with room for light trimming, which supports tight edges on cabinet sides, tops, and shelves after machining.
• The 3mm thickness creates a more substantial edge band than thin tape, which helps panels present a pronounced, durable edge profile on visible cabinet fronts or shelving runs.
• The 300 FT roll length supplies enough material for multiple cabinets or long runs, which reduces changeovers during edgebanding and helps keep color tone consistent across a project.
• The PVC construction provides a uniform synthetic edge material, which works with standard edgebanding equipment commonly used in woodworking and cabinet production environments.
• The Rehau, Inc. branding and 301373-009 part number define an exact product, which supports repeat orders when installers or shops need to match this specific Peeperdust edge on future work.

Edgebanding Size And Fit For Panel Edges

This Peeperdust edgebanding has a 15/16 inch width, so it spans typical 3/4 inch engineered panels with extra margin, allowing trimming for a flush edge along both faces. The 3mm thickness produces a solid PVC edge that aligns well with many cabinet layouts where a thicker band is preferred. At 300 FT per roll, it covers a series of cabinet boxes or shelving sections before a new roll is needed, keeping work moving smoothly. As an Edge Banding product in the Edgebanding & Surfacing category, it slots directly into cabinet and panel finishing procedures wherever exposed edges on sheet goods need a PVC finish.

Using This PVC Edgebanding In Woodworking

Where Peeperdust Edgebanding Is Typically Applied

This Peeperdust edgebanding, in the Edge Banding product class, is suited to finishing exposed edges on cabinets, furniture, and other projects using panel stock where a PVC edge is specified. The 15/16 inch width allows it to cover standard 3/4 inch case sides, tops, bottoms, and shelves with a modest overhang for trimming, which helps produce clean lines along cabinet runs. With a 3mm thick profile, the banding forms a pronounced edge, which can be used on vertical cabinet sides or horizontal shelves where a heavier edge detail is desired for appearance or presence. The 300 FT roll length gives shops enough material to run multiple cabinet boxes, doors, or panels in the same Peeperdust color, which helps achieve visual continuity on a complete room or bank of units. Being PVC, the banding integrates with tooling set up for synthetic edging, aligning with common equipment on professional edgebanders.

Why These Dimensions Support Consistent Results

The 15/16 inch width on this Rehau Peeperdust edgebanding extends just beyond both faces of a 3/4 inch panel, which provides workable tolerance for trimming without leaving raw substrate exposed. The 3mm thickness maintains a defined edge line along doors, drawer fronts, or casework, which supports a uniform appearance when multiple pieces are lined up in an installation. With 300 FT on each PVC roll, production runs can stay on a single color and lot for many parts, which simplifies set-up and helps reduce interruptions when banding a series of components. The defined manufacturer part number 301373-009 from Rehau, Inc. ties these dimensions and color to a specific SKU, which allows installers and shops to specify the same edging when coordinating with Wurth Baer Supply for ongoing or repeat projects.

Common Questions About Peeperdust Edgebanding Use

Selecting This PVC Edgebanding For Your Project

The PVC 3mm thick Peeperdust edgebanding from Rehau, Inc., at 15/16 inch width and 300 FT roll length, gives installers a defined match for finishing 3/4 inch panel edges. With its specific 301373-009 part number and classification as Edge Banding in the Edgebanding & Surfacing category, it aligns directly with cabinet and panel projects that call for this size and PVC construction. For work that needs a consistent Peeperdust edge across multiple cabinets or panel runs, this roll provides a focused option through Wurth Baer Supply.