Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Pepperdust edgebanding is a Rehau, Inc. edge banding that covers and finishes raw panel edges in a Pepperdust color match, giving casework, shelving, and cabinet components a consistent finished edge across the run. The PVC construction creates a defined edge profile that hides the core of the panel, so exposed edges present as a uniform surface instead of showing substrate. The .018 inch thickness of this edge banding provides a thin, unobtrusive edge that suits production casework where a low-build edge is preferred. The 15/16 inch width is sized to cover common panel thicknesses with a small overhang for trimming, which helps installers flush the edge to the face without starving coverage. The 600 foot length on this product supports longer runs or multiple cabinets from a single roll, reducing changeovers during fabrication or installation.
The .018 inch thickness of this PVC Pepperdust edge banding from Rehau, Inc. keeps the material flexible enough to follow straight cabinet edges while maintaining a clean, narrow edge line, which benefits projects targeting a subtle edge treatment. The 15/16 inch width gives fabricators working room when aligning to the panel, so slight placement variation still leaves full coverage before trimming flush. The 600 foot length provides ample footage for a production run of cabinets or casework panels, allowing a single roll to carry through repeated parts with consistent material and color. Together, these dimensions help maintain a repeatable edging process where panels see the same thickness, width coverage, and Pepperdust finish from part to part.
This edge banding is identified as Edgebanding, PVC Pepperdust .018 inch thick, 15/16 inch width x 600 FT, so it is suited to covering panel edges where that Pepperdust finish is required across the project. The edge banding falls under the Edgebanding & Surfacing category as Edge Banding, aligning it with cabinet, furniture, and general woodworking panel use where raw edges need color-matched coverage. The 15/16 inch width lets shops apply it to common panel thicknesses while leaving enough material for edge-trimming equipment, which matters when processing multiple cabinet sides, shelves, or tops to a consistent finished dimension. The 600 foot length supports usage across many parts in a single job, keeping the Pepperdust color continuous across doors, drawer fronts, and case edges that share the same visual line.
The combination of .018 inch thickness and PVC construction in this Rehau, Inc. edge banding helps maintain a thin but defined edge after trimming, supporting a clean transition from face material to edge on cabinets and shelving. The 15/16 inch width not only covers standard panel edges but also gives operators tolerance during banding, so minor shifts in placement still leave enough material for a clean flush trim without exposing the panel core. The 600 FT length described in the product name and web description enables long, uninterrupted edging runs, which reduces color variation between parts because they are all edged from the same roll. The specific Pepperdust identification ties each edged part back to the same finish reference, which matters when aligning adjacent parts where even small color shifts at the edge would stand out.
The Pepperdust PVC edgebanding is an Edge Banding in the Edgebanding & Surfacing category, so it is intended to cover and finish exposed panel edges on cabinets and similar woodworking projects.
This PVC Pepperdust edge banding is 15/16 inch wide, giving enough coverage over typical panel thicknesses so the edge can be trimmed back flush while maintaining full color across the edge.
The Pepperdust PVC edgebanding is .018 inch thick, creating a slim edge profile that keeps the transition from the panel face to the edge subtle on cabinet and casework components.
The Edgebanding, PVC Pepperdust .018 inch thick, 15/16 inch width product is supplied in a 600 FT length, supporting extended cabinet or panel runs using the same Pepperdust material.
This Pepperdust PVC edge banding is produced by Rehau, Inc., placing it within a recognized line of PVC edgebanding materials used in woodworking and cabinet applications.
The manufacturer part number 301574-608 identifies this exact Rehau, Inc. PVC Pepperdust edgebanding in the .018 inch thickness, 15/16 inch width, 600 FT length configuration for repeat ordering.
This Edgebanding, PVC Pepperdust .018 inch thick, 15/16 inch width x 600 FT from Rehau, Inc. gives shops a defined option when a Pepperdust finish is required on exposed panel edges. The Edge Banding classification and PVC construction align it with cabinet and woodworking projects where a color-consistent edge is part of the design. The combination of .018 inch thickness, 15/16 inch width, and 600 foot length supports repeatable edging across multiple components. For projects built around the Pepperdust look, selecting this 301574-608 edge banding keeps color, dimensions, and material consistent from job to job.
Sold In: 1 Roll