Pepperdust edgebanding 1mm thick 15/16 width gives a defined PVC edge treatment that matches Pepperdust-colored panels, so cabinet and furniture projects keep a consistent look from face to edge. The 1mm thickness provides a noticeable, solid edge profile, which helps panels feel more substantial when doors and drawer fronts are handled on the job. With a 15/16 inch width, the strip covers standard panel thicknesses with a margin to trim, helping installers work cleanly along straight runs and corners. This edgebanding is made from PVC, so the edge surface stays uniform across long lengths, supporting a continuous appearance along cabinet banks or wall runs. The 600 FT length supports repeated production of Pepperdust projects from a single roll, which keeps color and finish consistent across multiple cabinets or furniture pieces in the same installation.
This Pepperdust edgebanding 1mm thick, 15/16 inch width x 600 FT is sized for practical panel edge coverage, so installers can work with a predictable trim margin. The 1mm thickness gives a stable strip during handling and application, which supports straight tracking along the edge of cabinets, shelves, or furniture parts. With a 15/16 inch width, the banding extends past typical panel faces before trimming, helping achieve a flush finish after cutting back. The full 600 FT length on a single roll supports uninterrupted runs on longer projects, which reduces joint lines along banks of cabinets or large storage installations.
This Pepperdust edgebanding 1mm thick, 15/16 inch width x 600 FT is classified as edge banding in the Edgebanding & Surfacing category, so it is suited to finishing exposed edges on cabinet and furniture panels. The Pepperdust color coordinates with Pepperdust decorative faces, allowing doors, drawer fronts, and casework sides to present as a single visual unit. As a PVC edgebanding product from Rehau, Inc., it can be matched to Pepperdust layouts across kitchens, closets, or commercial millwork where the same tone needs to carry across all visible edges. The 600 FT roll length helps larger jobs keep the same color lot across every panel, which supports consistent results when multiple installers are working from the same stock on site or in the shop.
The 1mm thickness on this Pepperdust PVC edgebanding provides enough material at the edge to stand out from ultra-thin tapes, which helps the edge feel substantial when doors are opened or shelves are loaded. That thickness also supports smoother trimming because the material holds its line during cutting. The 15/16 inch width provides coverage for common panel thicknesses with overhang, so the installer can trim back to the exact profile of the cabinet or furniture part without exposed substrate. The 600 FT length labeled on this Rehau 302044-052 roll means one roll can serve many panels on a single project, reducing color variation between batches and helping production shops set up once and run long sequences of Pepperdust parts without interruption.
This Pepperdust edgebanding is 1mm thick, 15/16 inch wide, and supplied in a 600 FT length, which supports typical cabinet and furniture panel edge applications.
The Pepperdust edgebanding is made from PVC, so the edge presents a continuous, uniform surface that matches the intended Pepperdust design along panel edges.
The 1mm thickness gives the Pepperdust PVC edge banding a more substantial profile, which supports a solid feel and stable trimming along doors, shelves, and casework edges.
The 15/16 inch width lets the edgebanding cover standard panel edges with some overhang, so installers can trim back to a flush, clean edge line after bonding.
This Pepperdust PVC edgebanding fits cabinet, furniture, and similar panel-based projects where a Pepperdust-colored edge is needed to coordinate with matching surfaces.
Rehau part number 302044-052 identifies this specific Pepperdust PVC edgebanding in 1mm thickness, 15/16 inch width, and 600 FT length for repeat ordering.
This Pepperdust edgebanding 1mm thick, 15/16 inch width x 600 FT from Rehau, Inc. gives cabinet and furniture projects a coordinated Pepperdust PVC edge that matches the intended design. The defined 1mm profile, practical 15/16 inch width, and extended 600 FT length support efficient work on both single installations and production runs. For Pepperdust-colored layouts that need matching edges along doors, drawer fronts, and case sides, this PVC edge banding provides a single, consistent source across the project.
Sold In: 1 Roll