PVC Field Elm edgebanding 3mm gives you a matched PVC edge treatment sized for common panel work, so exposed board edges can be finished to a consistent look. The 15/16 inch width covers typical panel thickness while providing a little working margin, which helps installers trim flush without risking a short reveal. The 3mm thickness builds a more substantial edge profile, so cabinet and furniture edges feel solid in daily use. The 300 FT length is suited to shop runs or multi-cabinet jobs, reducing changeovers between lengths. The Field Elm design ties into coordinating surfaces where that decor is used, helping projects keep a unified appearance. Being PVC, the banding provides a machinable, uniform material that responds predictably during trimming and scraping, which supports repeatable fit from part to part.
This Rehau, Inc. PVC Field Elm edgebanding is specified at 15/16 inch width, so it suits panel edges that finish inside that dimension, leaving enough overhang for trimming tools to work cleanly. At 3mm thick, it creates a defined edge that aligns with typical modern cabinet and furniture styles using thicker banding. The 300 FT format is appropriate for feeding through edgebanding equipment or cutting sections for hand application, depending on shop process. The PVC construction offers a stable profile as it is applied and trimmed, supporting alignment along the full panel edge. The Field Elm pattern runs the full length of the roll, so visual continuity can be maintained along tall panels, long tops, or repeated parts.
This PVC Field Elm edgebanding, classified under Edgebanding & Surfacing and Edgebanding, PVC, is oriented to cabinet and furniture projects that need a coordinated Field Elm edge. The 15/16 inch width makes it a match for casework, shelving, and door edges based on standard panel sizes, giving coverage with workable overhang for trimming equipment. The 3mm thickness supports applications where a thicker, more substantial band is preferred, such as commercial casework, residential cabinetry, or furniture components that are handled frequently. The 300 FT roll length suits shops that process multiple parts in the same decor, keeping color and pattern consistent from piece to piece. As a Rehau, Inc. edge banding with part number 301785-033, it fits into projects that specify that exact Field Elm PVC match, supporting continuity when coordinating with other materials carrying the same decor identification.
The combination of 15/16 inch width and 3mm thickness in this PVC Field Elm edgebanding shapes how panels are processed and finished. The width spans the edge with enough extra material for trimming operations, which helps keep the final edge straight from one end of the panel to the other. The 3mm thickness influences the visual and tactile profile, giving fronts and exposed edges a defined band that reads as a deliberate design detail on cabinets and furniture. Because the material is PVC, machining and trimming behavior stays consistent along the 300 FT length, which is important when dialing in settings on edgebanders or handheld trimmers. The continuous Field Elm decor along the roll lets fabricators cut parts for doors, sides, and shelves from the same run, helping each finished edge align visually with adjacent components in the installation.
This Field Elm edge banding is made from PVC, so it provides a uniform, machinable edge that works well with typical woodworking trimming and processing methods.
The PVC Field Elm edgebanding is 15/16 inch wide, giving coverage across standard panel edges with a slight overhang that allows clean trimming to final size.
The 3mm thickness creates a noticeably built-up edge, so cabinet and furniture parts have a defined front profile suited to thicker banding designs.
The 300 FT roll length supports longer runs of doors, shelves, and panels from one continuous strip, which helps maintain decor consistency across multiple parts.
Part number 301785-033 identifies this specific Rehau PVC Field Elm edgebanding, helping projects match the same decor and specification across repeat orders.
This product is classified as Edgebanding & Surfacing, Edgebanding, PVC, so it fits work that calls for PVC edge treatment with a Field Elm design.
This Rehau, Inc. PVC Field Elm 3mm thick, 15/16 inch wide, 300 FT edge banding lets shops match a Field Elm decor while working within familiar edgebanding dimensions. For cabinet and furniture runs needing consistent edges in this design, this roll from Wurth Baer Supply provides a defined 3mm PVC profile sized for standard panel work. When the job calls for a Field Elm look carried across exposed edges, this product delivers that decor in a format suited to typical woodworking processes.
Sold In: 1 Roll