Edgebanding, PVC Field Elm .018" Thick, 15/16" Width x 600 FT

PVC Field Elm Edgebanding For Clean Panel Edges

PVC Field Elm edgebanding from Rehau is a PVC edge banding designed to finish exposed panel edges with a consistent Field Elm look, which helps cabinet and furniture builders carry the same visual tone from the surface across the edge. The 15/16 inch width covers typical panel thickness while giving a little working margin, which helps installers trim flush without exposing the core. The .018 inch thickness provides a low-profile edge, which suits projects where a slim band is preferred over heavier edging. The 600 FT length is set up for production or multi-job use, which reduces changeovers when running repeated parts. As an edge banding in the Edgebanding & Surfacing category, it fits naturally into woodworking workflows where laminated or similar panels need a finished edge. The Rehau, Inc. branding connects this roll to a recognized PVC edgebanding line for shop-standardized projects.

Key PVC Field Elm Edgebanding Details That Matter

• The 15/16 inch width spans common panel thicknesses with extra coverage, which helps installers position the banding confidently and trim back to a clean, centered edge on cabinets, shelving, and casework projects.
• The .018 inch thickness creates a thin edge treatment, which helps produce a subtle transition from face to edge that works well when the design calls for a light visual profile instead of a chunky edge.
• The 600 FT roll length supports longer production runs, which lets shops run multiple cabinets or furniture pieces in the same Field Elm design without stopping frequently to change rolls or reset machines.
• The PVC material aligns with the Edgebanding & Surfacing category, which suits woodworking environments where synthetic edge banding is paired with laminated or similar panel faces for a coordinated assembly.
• The Field Elm description identifies the visual style, which helps builders match this banding to Field Elm surfaces so the edge appearance stays consistent across doors, drawer fronts, and panels.

Installation Fit For 15/16 Inch PVC Edgebanding

The 15/16 inch width on this PVC edgebanding gives installers a workable margin beyond typical panel thicknesses, which helps during alignment and trimming because there is enough banding to overhang slightly before flush trimming. The .018 inch thickness defines how the band forms around the edge, which suits applications where a slim, flexible band is used to create a neat transition without adding much bulk. As edge banding in the PVC category, it fits standard PVC edgebanding workflows on cabinet and furniture projects where panels are banded, trimmed, and finished in sequence. The 600 FT length gives shops a continuous run of material, which helps keep setup consistent across many parts that share the same Field Elm finish.

Using This Rehau Edge Banding In Woodworking Projects

Where This Field Elm Edge Banding Is Typically Applied

This edge banding is classified as Edgebanding, PVC and Edge Banding, which places it directly in cabinet, furniture, and general woodworking edge finishing roles where panel cores need to be concealed. The Field Elm designation ties the banding to a Field Elm visual tone, which matters when installers want the edge color and pattern to work with Field Elm-style surfaces in a project. The 15/16 inch width aligns with the way many shops band standard-thickness panels, which lets builders run common casework, shelving, and fronts using the same roll. The 600 FT length supports shop environments that cut, band, and trim many parts in a run, which helps keep the Field Elm look consistent from the first part to the last part in that sequence.

Why Thickness, Width, And Length Support Consistent Results

The .018 inch thickness of this PVC edge banding sets how prominent the edge will appear once flush trimmed, which matters when designers specify a lighter, more understated edge profile rather than a thicker band. The 15/16 inch width gives some overhang beyond the panel faces during application, which helps operators feed the part through edge banding equipment and then trim back to a clean line without leaving the core exposed. The 600 FT roll length allows many edges to be banded from a single roll, which supports repeatable color and surface appearance because every piece in that run uses the same Field Elm batch. The Rehau, Inc. manufacturer identification ties this product back to a known PVC edgebanding line, which helps shops align this material with their existing expectations for how Rehau edge banding behaves in normal woodworking processes.

Common Questions About Rehau 302164-225 Edge Banding

Select This Field Elm Edge Banding For Matching Jobs

This Rehau PVC Field Elm edgebanding in 15/16 inch width, .018 inch thickness, and 600 FT length offers a defined way to finish panel edges so they align with Field Elm designs. For cabinet, furniture, or general woodworking projects built around this look, choosing this edge banding lets shops run consistent, repeatable edges across many parts using the same material profile.