
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
PVC graphite edgebanding 1mm gives you a dedicated edge banding solution for finishing panel edges in a consistent graphite tone. This Rehau, Inc. PVC edge banding is designed as an edgebanding and surfacing product, so it covers raw board edges and presents a finished look that matches graphite-colored layouts. The 1mm thick PVC profile adds material at the edge, which helps visually balance with typical cabinet and casework surfaces where a more substantial edge is preferred. The 15/16 inch width lets you cover standard panel thicknesses while allowing trim back to a crisp line. A 300 FT length on a single roll supports longer runs of cabinets, closets, or fixtures without switching rolls mid-project, which helps maintain color continuity across each job. As a PVC edge banding in graphite, it fits directly into modern dark-toned designs where consistent edge color is essential.
The 15/16 inch width on this PVC graphite edge banding gives extra coverage past standard panel faces, which allows trimming equipment to cut back to an even line along both sides of the workpiece. The 1mm thickness provides a solid edge for machining and flushing operations, so the banding can be processed to meet surrounding surfaces cleanly on cabinets or casework. With a 300 FT length identified on this roll, installers can plan sequences of parts from the same run, which supports consistent graphite edge appearance from the first piece to the last on a job.
This PVC graphite edgebanding 1mm is positioned in the Edgebanding & Surfacing category with a PVC edgebanding, graphite description, so it is oriented to closing off exposed panel edges in cabinetry and similar woodworking applications. The 15/16 inch width aligns with common panel thicknesses, which means it can be applied along cabinet sides, shelves, and door or drawer fronts that fall within that coverage, then trimmed back to match the board. The graphite color description directs it toward projects that use darker tones, where a matching or coordinating edge is needed to carry color across panel faces and edges. As part of the Edge Banding product class from Rehau, Inc., it serves as a finishing component in the overall assembly, bringing raw board edges in line with the rest of the design.
The 1mm thick PVC construction gives this Rehau, Inc. edge banding enough material for edge processing, so trim and flush passes can be made while maintaining a full graphite surface at the edge. The 15/16 inch width creates an overhang on most standard panels, which supports accurate alignment during application and gives room for trimmers to remove excess while still leaving full coverage on both faces. With a 300 FT roll length specified, larger cabinet or fixture runs can be organized from the same lot, which helps keep the graphite tone uniform across doors, drawer fronts, and case parts in a project. Identifying this product by manufacturer part number 302044-508 helps shops repeat the same edge detail on future jobs, since the same width, thickness, and graphite appearance can be ordered again when matching earlier installations.
This PVC graphite edgebanding has a 15/16 inch width and 1mm thickness, so it covers typical panel edges with enough material for trimming to a clean, flush edge.
The Rehau 302044-508 PVC graphite edgebanding roll is 300 FT long, which supports longer runs of cabinets or fixtures while maintaining a consistent graphite edge appearance.
This graphite edge banding is made from PVC, so it matches the Edgebanding & Surfacing category focus on PVC edgebanding products for panel edge finishing.
The 1mm thickness on this PVC graphite edgebanding provides a solid edge for trimming and flushing, which supports a defined, finished profile on cabinet and casework edges.
The 15/16 inch width gives coverage beyond standard panel faces, letting installers trim back to a straight line while keeping both sides of the edge fully covered.
The manufacturer part number 302044-508 identifies this specific Rehau PVC graphite edgebanding with its 15/16 inch width, 1mm thickness, and 300 FT roll length.
This Edgebanding, PVC Graphite 1mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. combines defined dimensions with a graphite tone, so cabinet and woodworking shops can match exposed panel edges to dark design schemes across each project.
Sold In: 1 Roll