PVC Edgebanding Graphite 3mm For Clean Panel Edges

PVC edgebanding graphite 3mm gives panels a finished edge by covering exposed board edges on casework, shelving, and similar projects. This Rehau, Inc. edge banding is identified as a PVC material in a graphite color tone, so it matches graphite design schemes where a dark, modern edge is required. The 3mm thickness creates a more substantial edge detail compared to thinner bands, which suits heavier-use edges where a more pronounced profile is desired. The 1-5/16 inch width is sized to cover common panel thicknesses while allowing trimming for a flush, professional edge. A 328 foot roll length supports longer runs and multiple projects from a single coil, reducing roll changes on repetitive jobs. Classified under Edgebanding & Surfacing as PVC edge banding, it fits standard edge banding workflows where PVC is specified.

Key PVC Edgebanding Details For Trade Use

• The PVC construction defines a workpiece edge treatment that bonds to panel edges using standard PVC-banding processes, so it aligns with established cabinet and woodworking production methods.
• The graphite color provides a dark edge tone that coordinates with graphite-colored components, supporting visually consistent casework and furniture runs where edge color must match the surface design.
• The 3mm thickness establishes a thicker edge profile than thin tape-style banding, which suits applications needing a more robust visual edge or a transition between decorative faces and exposed core.
• The 1-5/16 inch width is sized to span typical panel thicknesses with trim allowance, so installers can route or trim back to a clean, flush line along both faces of the panel.
• The 328 foot roll length offers extended continuous edging from a single roll, which supports efficient processing of repeated parts or larger projects without frequent roll changes.

Edgebanding Size And Thickness In Installation

This Rehau, Inc. PVC edge banding in 1-5/16 inch width supports edge coverage on panels where some overhang is preferred, so trimming systems can cut back to a neat edge without exposing core material. The 3mm thick profile gives edgebanding machines a defined material cross-section to mill, which is useful for creating consistent radiused or flush edges along cabinet sides, doors, and shelves. Being PVC, it works within standard PVC-focused edge banding setups, so it aligns with processes built around PVC heating and bonding characteristics. The 328 foot roll length provides enough material for production-style runs, reducing interruptions when edging multiple cabinets or casework components in the same graphite finish.

Using Graphite PVC Edgebanding In Real Projects

Where This Graphite Edge Banding Fits Best

This edge banding is described as PVC, graphite 3mm thick in a 1-5/16 inch width, so it fits projects that call for a dark, graphite-colored edge on workpieces. In casework or furniture built with graphite-toned faces, this banding allows the edge to visually align with the surface color, supporting a cohesive look along doors, drawer fronts, and cabinet sides. The edge banding is part of the Edgebanding & Surfacing category and specifically identified as PVC edge banding, which aligns it with cabinetry, shelving, and general woodworking where PVC edging is specified as the finishing method. With a 328 foot length per roll, it serves both individual installations and repeated production jobs that share the same graphite finish and 3mm edge profile.

Why Thickness, Width, And Roll Length Matter

The 3mm thickness and 1-5/16 inch width define how the Rehau, Inc. PVC edge banding engages with typical edge banding machinery, because the thicker cross-section allows profiling and trimming that produce a defined edge on cabinets and panels. This thickness can support a more substantial transition from surface to edge, which matters on high-contact fronts and visible shelving edges. The 1-5/16 inch width leaves room for a slight overhang on both faces of standard panels, so trim passes can remove excess material and leave a clean, straight edge across the workpiece. The 328 foot length gives installers and fabricators enough continuous material to run multiple panels with the same setup and color, which supports workflow continuity on graphite-themed projects. Identified by manufacturer part number 302114-019, the graphite 3mm specification ties directly to this combination of color, thickness, width, and length for repeat ordering.

Common Questions About This PVC Edge Banding

Select This Graphite PVC Edge For Matching Runs

This Rehau, Inc. PVC edgebanding in graphite 3mm thickness and 1-5/16 inch width offers a defined combination of color, size, and material that suits graphite-themed cabinetry and panel work. The 328 foot roll length supports both one-off installations and production runs under a single part reference, 302114-019. For projects built around a graphite color scheme that call for PVC edge banding, this edge treatment aligns panel edges with the overall design while supporting standard PVC-banding workflows.