Edgebanding PVC Storm Flex 3mm defines this product as a PVC edge banding solution built around a 3mm thickness, so it provides a substantial edge profile where a heavier, more impact-tolerant band is desired on a project. The 15/16 inch width gives enough coverage for common panel thicknesses with a small overhang for trimming, helping installers achieve a straight, finished line along cabinet and furniture edges. The 300 FT length keeps a continuous run available for multi-piece work, reducing interruptions during production runs or larger jobs. The Storm designation identifies the specific color tone, supporting consistent visual results when matching existing Storm-finished components. The PVC material places this banding in the Edgebanding & Surfacing Edgebanding, PVC category, which helps align it with established shop processes that already rely on PVC for edge treatment. The product is supplied under the Rehau, Inc. brand and identified by manufacturer part number 302124-058, so shops can reference the exact line when repeating or standardizing jobs.
The 15/16 inch width of this PVC Storm Flex banding provides coverage that extends just beyond typical panel thickness, which supports common trimming methods to bring the edge flush. The 3mm thickness adds material at the edge, so routing and finishing steps produce a more defined, solid-feeling edge profile on cabinets, casework, or similar assemblies. Being PVC Edgebanding & Surfacing Edgebanding, PVC, this product is intended to run within standard PVC-compatible processes, so it fits naturally into workflows using typical PVC edgebanding tools and edge-trimming equipment. The 300 FT length on a single roll allows longer continuous edges to be applied without frequent material changeover, which supports smoother progress on straight runs, curved sections, or multiple identical parts.
This Rehau, Inc. edge banding is classified as Edgebanding, PVC and Edge Banding, so it fits into cabinet, furniture, and general woodworking projects that call for a PVC-based edge treatment. The 3mm thick profile serves well where designers or builders specify a visibly robust edge, giving doors, drawer fronts, or shelves a more substantial border that stands out compared to thin-band applications. With a 15/16 inch width, fabricators can apply the banding to panels and then trim back to a crisp line, which is useful when working across varying panel tolerances yet aiming for a uniform finished width. The Storm Flex detail identifies a specific color line, so it works effectively wherever Storm-toned faces or coordinating surfaces are part of the design concept, helping maintain color continuity from panel face to edge.
The defined 3mm thickness on this PVC Storm Flex banding gives shops a predictable edge dimension to work with, which can streamline setup for routers and trimmers calibrated around that thickness. Because the width is precisely 15/16 inch, installers know how much overhang they will be trimming, which helps dial in cutters, guides, and stops for consistent results across large batches. The 300 FT roll length under part number 302124-058 means one coil can service multiple cabinets or casework runs, reducing mid-job material changes that might otherwise introduce variation between early and late parts. Identifying the product as Edgebanding, PVC within the Edgebanding & Surfacing category also gives purchasing and production teams a clear classification, supporting repeat ordering and standardized workflows when the same edge profile and Storm color are specified on future jobs.
This Rehau, Inc. PVC edgebanding is 15/16 inch wide and 3mm thick, which gives installers a defined trim margin and a robust edge profile on cabinet and furniture panels.
The Storm Flex PVC edge banding roll is 300 FT long, allowing longer production runs or multiple projects to be completed from a single coil before changing material.
The Storm Flex 3mm product is PVC edge banding, so it aligns with standard PVC edgebanding, trimming, and surfacing practices commonly used in woodworking shops.
The 3mm thickness provides a heavier edge profile, giving doors, drawer fronts, and panels a more substantial border once trimmed and finished on the workpiece.
The Storm Flex designation identifies a specific PVC Storm color line, helping fabricators coordinate the edge banding appearance with Storm-toned surfaces or matching components.
This PVC edge banding is identified as Edgebanding, PVC Storm Flex 3mm Thick, 15/16 inch Width x 300 FT by Rehau, Inc., with manufacturer part number 302124-058.
The Edgebanding, PVC Storm Flex 3mm Thick, 15/16 inch Width x 300 FT roll offers a defined combination of thickness, width, and color that supports repeatable edge details on cabinets and furniture. The 3mm profile, paired with 15/16 inch coverage, gives fabricators a consistent basis for trimming and finishing across panels. With classification in the Edgebanding & Surfacing Edgebanding, PVC category and the Rehau, Inc. 302124-058 designation, this banding fits well into organized shop inventories and standard PVC-based workflows whenever a Storm-toned edge is required.
Sold In: 1 Roll