PVC antique white edgebanding gives panel edges a finished look by covering raw substrate with a consistent antique white surface that visually ties into matching components. The 3mm thick PVC edge banding provides a substantial edge profile that helps create a solid, furniture-like appearance on cabinets and casework. The 15/16 inch width covers standard panel thickness with room to trim for a clean, flush alignment to the face. The flex PVC construction allows the strip to follow straight runs and gentle curves, helping installers handle typical cabinet and shelving layouts. Supplied on a 300 ft length, this PVC antique white edgebanding supports longer runs and multiple projects from one roll, which reduces changeovers during production work. The Rehau, Inc. brand and specific manufacturer part number 302124-506 allow shops to specify the same antique white edge consistently across repeat jobs.
The 15/16 inch width of this PVC antique white edgebanding is sized to overhang standard panel thickness, giving room to trim both faces back to the substrate for a clean edge line. The 3mm thickness provides enough material for trimming and slight profiling without cutting through the PVC layer during edge finishing. The flex PVC construction lets the band sit flat against panel edges during bonding, which supports even pressure along the run. With a 300 ft continuous length, installers can set up the edgebanding for extended passes on edging equipment or longer hand-application runs, which helps maintain consistent alignment and color across all edges in a project.
This Rehau, Inc. PVC antique white edgebanding is part of the edge banding class, so it is intended for covering exposed panel edges on cabinets, shelves, and similar casework. The 3mm thick profile creates a noticeable, durable-feeling edge on door and drawer fronts where hands frequently contact the workpiece. Because the width is 15/16 inch, it suits common panel build-ups, letting fabricators apply the band slightly proud and then trim it flush for a straight, uniform line. The antique white color supports matching cabinet components finished in similar tones, which keeps the joint between surface and edge visually quiet along cabinet runs. The 300 ft roll length gives shops enough material to edge multiple carcasses, shelves, and fronts in the same project, which helps maintain a single antique white shade across all visible edges.
The 3mm thick PVC construction gives installers enough edge material to fine-tune flush-trimming and light profiling without risking exposure of the core substrate, which supports consistent results across batches. The 15/16 inch width provides a repeatable setup dimension for edgebanding equipment, simplifying alignment when running many panels in sequence. Flex PVC sits well against edge surfaces during pressing, which is important for achieving full contact along the length and maintaining a straight finished line. The 300 ft roll format reduces the number of roll changes during large jobs, which helps keep color and sheen consistent because the same Rehau, Inc. manufacturer part number 302124-506 is used from start to finish. Being a defined edge banding product in antique white also simplifies reordering, so future replacement parts and additional cabinets can match the existing edges.
This PVC antique white edgebanding is 3mm thick, 15/16 inch wide, and supplied in a 300 ft length, giving enough material for substantial edges and extended runs on cabinet and panel work.
The 3mm thick PVC builds a more substantial edge profile that can be trimmed and lightly profiled, creating a solid, furniture-like edge on doors, drawer fronts, and shelving.
The 15/16 inch width overhangs standard panel thickness, allowing installers to trim both faces back to the substrate for straight, flush edges across cabinet carcasses and shelves.
The flex PVC construction allows the strip to conform to straight runs and gentle curves, supporting smooth application along typical cabinet and bookcase layouts.
The 300 ft roll length supports longer, uninterrupted edging passes, reducing roll changes during production and helping maintain consistent antique white color across all edged components.
The Rehau 302124-506 part number identifies this specific 3mm thick, 15/16 inch wide, 300 ft PVC antique white flex edgebanding for consistent selection and reordering.
This Rehau, Inc. PVC antique white flex edgebanding combines a 3mm thickness, 15/16 inch width, and 300 ft length to support efficient edging on cabinets, shelves, and casework. For projects built around antique white surfaces, this defined edge banding lets shops match visible edges to the field, use repeatable dimensions on edging equipment, and reorder by the 302124-506 part number whenever the same appearance and format are required.
Sold In: 1 Roll