Fonthill Pear PVC edgebanding provides a PVC edge treatment in a Fonthill Pear finish, so panel edges get a consistent look that matches the designated decor along the entire run. The 3mm thick construction creates a substantial edge, which helps cover minor panel edge irregularities and gives a more robust profile where exposed edges see regular contact. The 1-5/16 inch width is sized to cover common panel thicknesses with trim margin, allowing installers to machine a flush, clean edge after bonding. A 300 FT length per roll supports longer production runs and repeat work on the same project, reducing changeovers between pieces. The edge banding is made from PVC, so it offers a stable, uniform material that works predictably with standard edge-banding equipment used in woodworking shops. Manufactured by Rehau, Inc., this edge banding lines up with part number 303334-523 for ordering and repeat sourcing.
The 1-5/16 inch width on this PVC edge banding gives installers workable overhang on both sides of common panel thicknesses, so trimming equipment can cut back to a crisp, aligned edge. The 3mm thickness yields a sturdy band that responds well to profiling or light edge shaping after it is bonded, which is useful on cabinet doors, shelves, and case edges that see repeated handling. With 300 FT on a roll, the format supports continuous feeding through standard edge-banding machines, so longer carcass runs or batches of fronts can be processed without frequent material changes. The PVC construction keeps the material uniform along the length, supporting predictable cutting, trimming, and scraping behavior across every piece in the run.
This Rehau, Inc. edge banding is part of the Edgebanding, PVC category, so it is suited to covering exposed edges on wood-based panels in cabinetry and similar woodworking applications. The Fonthill Pear finish ties directly to projects planned around that decor, so casework, shelves, and fronts can carry the same visual tone on both faces and edges. At 3mm thick, the banding supports use on cabinet doors, end panels, and shelving where a pronounced edge detail is preferred over extremely thin tape-style edges. The 1-5/16 inch width gives flexibility for use on a range of panel thicknesses, since it allows some excess on either side for trimming, which works well on vertical gables, horizontal tops, or interior dividers cut from standard sheet goods.
The defined 3mm thickness and 1-5/16 inch width help shops set up machines once and expect consistent results, because every length of this PVC banding shares the same profile and sizing. Having 300 FT on each roll enables longer production sequences using a single material feed, which keeps color and finish consistent from the first cabinet component to the last in a run. The PVC construction offers a predictable cutting and trimming response, so tools produce similar edge quality from part to part, supporting stable setups on trimmers and scrapers. The specific manufacturer part number 303334-523 ties orders back to the same Fonthill Pear product, which simplifies reorders when an existing installation needs additional parts or future matching work.
This edgebanding is made from PVC, providing a uniform synthetic material that works with common edge-banding equipment used in woodworking shops.
The edge banding is 3mm thick, giving a substantial edge that can be profiled or lightly shaped on cabinet doors, shelves, and exposed casework.
This PVC edgebanding is 1-5/16 inch wide, providing coverage past typical panel thicknesses so edges can be trimmed back flush after bonding.
The roll length is 300 FT, supporting extended cabinet or furniture runs while keeping the same Fonthill Pear finish across all processed parts.
This edge banding is manufactured by Rehau, Inc., providing a defined source for matching future work by using the same product line.
The manufacturer part number is 303334-523, which ties directly to this 3mm thick, 1-5/16 inch wide, 300 FT Fonthill Pear PVC edge banding.
This Fonthill Pear PVC edgebanding from Rehau, Inc. combines a 3mm thickness, 1-5/16 inch width, and 300 FT roll length for cabinet and woodworking runs that specify this decor. For projects built around Fonthill Pear panels, using this edge banding keeps exposed edges visually aligned with the chosen finish while supporting straightforward processing on standard edge-banding equipment.
Sold In: 1 Roll