PVC Fonthill Pear edgebanding from Rehau, Inc. is PVC edge banding designed to finish exposed edges on cabinets, furniture, and casework where a Fonthill Pear look is required. The 15/16 inch width covers standard panel thicknesses while giving a bit of overhang for trimming, which helps achieve a flush, professional edge on laminated or veneered panels. The 0.018 inch thickness keeps the edge profile slim, which supports a clean transition from face to edge without a bulky feel. The 600 FT roll length suits shop runs and repeat work, reducing roll changes during production. As PVC edgebanding, it is suited to common shop edgebanding equipment and workflows, which keeps installation predictable across similar projects. The Fonthill Pear color and pattern tie the finished edge to matching surfaces, so edges read as part of the overall design rather than a separate strip.
This 15/16 inch PVC edge banding is sized so it extends slightly beyond common panel thicknesses during application, which supports accurate trimming back to the panel face. The 0.018 inch thickness behaves like a light edge skin, which responds well to standard trimming knives and routers in typical edgebanding setups. Being PVC, the material suits the heat and pressure conditions found on most commercial edgebanders, which helps maintain bond quality when paired with appropriate processes. The 600 FT roll length supports feeding through automatic equipment with fewer interruptions, which keeps alignment and tracking more consistent over a full run of doors, shelves, or cabinet parts. The Fonthill Pear design carries across the entire roll, which helps keep jointed or sequential parts visually consistent along their edges.
This Rehau, Inc. edge banding is used on cabinet, furniture, and casework edges where a Fonthill Pear appearance is specified, so exposed substrate edges match Fonthill Pear faces. The 15/16 inch width works well on many panel-based components such as shelves, ends, and doors, because it spans the thickness and still allows a trimming margin. Shops applying laminate or matching decorative surfaces in Fonthill Pear can run this band on exposed sides, which keeps the project visually unified from face to edge. In custom and production environments, the 600 FT roll supports runs of multiple cabinets or room sets in the same color, so installers can carry a consistent look across related jobs or replacement pieces drawn from the same material lot.
The 0.018 inch thickness on this PVC banding gives a lean edge that is straightforward to trim without heavy profiling, which helps maintain crisp lines along doors and casework when flush trimming or light easing of corners. Thin PVC behaves predictably under trimmers, so operators can work at normal feed rates without fighting a bulky edge. The 600 FT roll length supports long, continuous runs on an edgebander, which reduces setup interruptions and helps maintain consistent heat and pressure conditions from part to part. This consistency supports even adhesion performance across an entire batch. The width and thickness pairing also support repeatable results when the same setup is used again, which is useful when producing matching replacement parts or extending an existing Fonthill Pear installation later.
This PVC Fonthill Pear edgebanding is 15/16 inch wide and 0.018 inch thick, which suits standard panel thicknesses while leaving material for clean trimming to a flush edge.
The edgebanding roll is 600 FT long, which supports longer production runs and helps maintain consistent color and edge appearance across multiple cabinet or furniture parts.
This Fonthill Pear edge banding is made from PVC, which works with standard shop edgebanding equipment and typical trimming tools used on cabinet and furniture edges.
This 15/16 inch PVC edgebanding is manufactured by Rehau, Inc., and is offered in a Fonthill Pear design for coordinated cabinet and furniture edge finishing.
The 301674-954 number is the manufacturer part number for this Rehau PVC Fonthill Pear edgebanding, which identifies this exact width, thickness, length, and design.
The 0.018 inch thickness creates a slim edge that trims easily and blends closely with the panel surface, supporting smooth finished corners and a low-profile edge line.
This PVC Fonthill Pear edgebanding from Rehau, Inc. combines a 15/16 inch width, 0.018 inch thickness, and 600 FT roll length to support efficient shop work on cabinets, furniture, and casework. The dimensions are suited to trimming workflows that target a clean, flush edge on typical panel builds. The Fonthill Pear appearance aligns the finished edge with matching surfaces, which keeps projects visually coherent when doors, drawer fronts, and cases share the same look. For shops working with Fonthill Pear designs, this edge banding offers a consistent way to carry that finish across every visible edge in a run.
Sold In: 1 Roll