Rehau ABS Edgebanding 15/16" x 1 mm, Dusk Pine, 600', 315431 108

Edgebanding PVC Dusk Pine 1mm For Clean Panel Edges

Edgebanding PVC Dusk Pine 1mm identifies this as a PVC edge banding in a dusk pine design, so it finishes exposed panel edges to visually match dusk pine surfaces across cabinets, furniture, or fixtures. The 1mm thickness gives a substantial edge profile that covers raw board edges while creating a solid transition from face to edge. The 15/16 inch width is sized to cover standard panel thicknesses with a small trimming margin, which supports clean, flush edges after machining. The 600 foot length provides extended run capacity from a single roll, which reduces changeovers during production runs. As a PVC product in a dusk pine tone, it helps create consistent appearance from component to component on projects that call for this specific look.

Key PVC Dusk Pine Edge Banding Advantages

• The 1mm thick PVC construction provides a defined edge profile that covers substrate edges, which supports a solid feel and a consistent transition between panel face and edge.
• The 15/16 inch width gives coverage across typical board thicknesses with trim allowance, which helps achieve tight, flush edges after trimming operations on edgebanding equipment.
• The dusk pine design aligns the edge appearance with dusk pine surfaces, helping maintain a uniform look across doors, drawer fronts, and casework elements using this decor.
• The 600 foot roll length supports extended production sequences on a single coil, which reduces roll changes on edgebanders and helps maintain workflow continuity.
• The edge banding design as part of the Edge Banding product class defines this as a finishing component for exposed edges, which supports a professional appearance on completed panels.

Installation Fit For 15/16 Inch PVC Edgebanding

The 15/16 inch width of this PVC dusk pine edgebanding is sized to work with common panel thicknesses, so there is material available on both sides of the edge for trimming to a flush finish. The 1mm thickness works with edgebanding equipment set up for this gauge, allowing predictable trimming and scraping passes. As a PVC edge banding, it is suited to standard edge banding workflows used in cabinet and casework production. The continuous 600 foot length supports long runs of identical edges on a single setup, which is useful when processing multiple dusk pine components in sequence.

Using This Rehau Dusk Pine Edge Banding In Projects

Where This PVC Dusk Pine Edgebanding Fits Best

This edge banding is part of the Edgebanding & Surfacing category and the Edge Banding product class, so it is intended for finishing exposed edges on panels in woodworking and related applications. The dusk pine description defines its visual role alongside dusk pine surfaces, aligning doors, drawer fronts, cabinet sides, and shelves with the same decor. The 15/16 inch width works with panel edges that need slight overhang for trimming, which applies to many casework and furniture components built from sheet goods. With a 600 foot roll length, the product supports both small batches and extended production for dusk pine projects without frequent material changes.

Details That Support Consistent Edge Banding Results

The 1mm thick PVC construction gives enough material for trimming and finishing operations, supporting repeatable edges across multiple passes on an edgebander. The defined 15/16 inch width simplifies machine setup because the overhang is consistent along the entire length, which supports even trimming and a straight finished edge. The manufacturer designation from Rehau, Inc. and the specific manufacturer part number 315431-108 identify this exact dusk pine PVC edge banding variant, which matters when matching existing dusk pine installations or planning additional components for the same decor. The 600 foot length means every foot of edge on dusk pine panels can be drawn from the same roll, supporting visual continuity across projects.

Common Questions About This Dusk Pine Edge Banding

Selecting This Dusk Pine Edgebanding For Your Work

Choosing this Edgebanding, PVC Dusk Pine 1mm Thick, 15/16 inch Width x 600 FT from Wurth Baer Supply ties together dusk pine panels with a matching PVC edge in one continuous run. The defined 1mm thickness, 15/16 inch width, and 600 foot length, along with its role as an Edge Banding product, support cabinet, furniture, and casework projects that call for a dusk pine edge detail. When a project specifies this decor, using this Rehau 315431-108 edgebanding aligns material choice with the required dusk pine finish.