Edgebanding PVC Dusk Pine 1.2mm identifies this Rehau PVC dusk pine edge banding as a dedicated solution for finishing raw panel edges, so cabinetmakers can match exposed edges to dusk pine surfaces in one continuous run. The 1.2mm thickness gives the edge banding enough body to cover exposed substrates, supporting a more solid edge profile on cabinets and casework. The 15/16 inch width provides coverage for common board thicknesses while allowing slight overhang for trimming during fabrication. The dusk pine color tone aligns the visible edges with dusk-pine-style panels, which helps maintain a consistent look across doors, drawer fronts, and carcasses. The 600 FT length in a single roll supports longer production runs and multiple cabinet projects before changeover. As a PVC edgebanding product, it is suited to typical woodworking shop environments where panel edges demand a matching finish.
The 15/16 inch width on this Rehau PVC dusk pine edgebanding gives fabricators a practical margin when banding standard panel thicknesses, so the material can be applied slightly proud and then trimmed back for a flush edge. The 1.2mm thickness works with common edge-banding application and trimming equipment, allowing shops to follow their usual feed and trim steps. Because it is supplied as a 600 FT PVC roll, it can be run through edgebanding stations that handle continuous coil stock, which helps keep panel movement straightforward on production lines. The dusk pine color throughout the banding edge helps keep the visible edge consistent after trimming and scraping operations.
This Rehau, Inc. edgebanding is defined as PVC Dusk Pine 1.2mm Thick, 15/16 inch Width x 600 FT, placing it directly in cabinet and furniture edge finishing where dusk pine surfaces are used. The dusk pine designation makes it well suited for edging doors, drawer fronts, and carcass parts built from dusk-pine-style panels, helping all exposed edges carry the same visual tone. The 600 FT coil gives production shops a continuous supply for kitchen runs, office cabinetry, or casework built around this color family, reducing changeovers between components. As part of the Edgebanding & Surfacing category, it fits into workflows that rely on PVC edge material to complete laminated or surfaced panels.
The 1.2mm thickness on this edge banding provides a measurable layer of PVC at the edge, which supports a more defined profile after trimming and scraping, and helps the edge read as part of the finished face. The 15/16 inch width offers extra coverage beyond the panel thickness, giving operators trimming tolerance that supports cleaner final passes without exposing the core. The dusk pine finish carried along the edge means that, after machining, the face, edge, and corners present a coordinated appearance on doors and panels. The Rehau manufacturer part number 315608-108 precisely identifies this dusk pine, 1.2mm thick, 15/16 inch wide, 600 FT PVC edgebanding, which matters when shops repeat orders to match existing installations or maintain consistency across phased projects.
This Rehau PVC dusk pine edgebanding is 1.2mm thick, 15/16 inch wide, and supplied in a 600 FT length, which supports standard cabinet edge coverage and extended runs.
The 1.2mm thick PVC layer provides a solid edging profile, which supports smoother trimming and scraping and helps the finished edge blend cleanly with the panel face.
The 15/16 inch width spans typical panel edges with some overhang, giving room to trim the edgebanding flush without risking exposure of the core material.
This product is PVC edgebanding, which aligns with common woodworking shop equipment and workflows built around PVC edge treatment for surfaced panels.
The 600 FT roll length supports multiple cabinets or larger runs from a single coil, keeping color and lot consistent across doors, drawers, and case parts.
Manufacturer part number 315608-108 identifies this specific Rehau PVC dusk pine edgebanding in 1.2mm thickness, 15/16 inch width, 600 FT length for repeat ordering.
This Rehau PVC Dusk Pine 1.2mm Thick, 15/16 inch Width x 600 FT edgebanding gives shops a defined match for dusk-pine-style panels, so cabinet edges, doors, and drawer fronts align in color. The combination of 1.2mm thickness and 15/16 inch width supports straightforward trimming to a clean, continuous edge. For runs built around dusk pine designs, this 600 FT PVC edgebanding roll provides the material basis to carry that look across an entire project.
Sold In: 1 Roll