SurfPrep 5 inch 150 grit sanding disc gives you a consistent abrasive step when you need a film-backed disc for controlled stock removal and surface prep. The SurfPrep brand ties this disc directly to professional abrasive systems used across woodworking and related trades, so it fits comfortably into workflows already built around SurfPrep products. This disc is classified under abrasive discs, which positions it specifically for sanding operations rather than broader shop tasks, helping you standardize material choices by function. The web description and product name both specify aluminum oxide as the abrasive, which delivers a familiar cutting action for intermediate sanding passes where you want steady material removal without jumping too quickly to fine finishing. The 150 grit rating clearly defines this disc as a mid-grit choice, allowing you to slot it between coarser and finer steps for predictable scratch patterns.
The 5 inch diameter called out in both the web description and SAP description anchors this disc to tools sized for 5 inch abrasive discs, giving you an exact measurement for matching to your sander pad. The 8-hole detail in the SAP description identifies a specific hole configuration, which aligns with sanders that use that pattern to channel dust away through the pad during operation. The product is presented as a disc within the abrasive discs class, which means it is designed for face-mounted use on compatible disc-style sanders rather than edge-use tools. The aluminum oxide abrasive and film construction described together create a sanding face intended to stay flat under normal disc loading, supporting more even contact when the disc is properly centered on the backing pad.
The SurfPrep 5 inch 150 grit 8-hole aluminum oxide sanding disc on film, silver, as described in the product name and web description, sits solidly in the abrasives category for sanding operations. Within that, the abrasive discs product class frames it as a tool for surface preparation and refinement on flat or slightly contoured surfaces that suit disc-style sanding. The aluminum oxide material specified in the description supports mid-grit tasks where you want a balance between cutting speed and surface refinement, such as smoothing after planing or shaping steps. Because 150 grit is neither very coarse nor ultra-fine, it functions well as a bridge between aggressive stock removal and higher-grit finishing. The 5 inch format referenced in both the name and SAP description corresponds with common random-orbit and disc sander platforms, so it can slot into tool fleets that are already standardized around this size. The 8-hole layout mentioned in the SAP description is tailored to sanders built with that pattern, allowing the disc to align with pad holes so sanding debris can move through the disc face during operation. The silver color in the product name adds a simple visual marker that helps identify this specific disc type on racks or carts alongside other SurfPrep abrasives.
The combination of aluminum oxide abrasive and film backing, noted across the product name, web description, and SAP description, matters when dialing in repeatable sanding behavior. The aluminum oxide provides a consistent cutting action at 150 grit, which supports predictable scratch depth from job to job when you repeat the same sanding sequence. The film backing described in those same entries creates a stable base that resists uneven flexing across the disc face, helping each pass track more uniformly over the work surface. The 150 grit rating, explicitly called out, defines the disc as suitable for intermediate smoothing and surface preparation, so you can use it as a reliable mid-step before moving to finer abrasives. The 5 inch diameter and 8-hole configuration together, as listed in the SAP description and implied by the product name, allow the disc to seat properly on compatible pads with matched vent holes, which supports dust evacuation paths designed into those sanders. By keeping these core details consistent - size, hole pattern, grit, abrasive type, and backing - this SurfPrep disc supports repeatable setups and outcomes across multiple workpieces and projects.
The SurfPrep 5 inch 150 grit sanding disc is specified as 5 inch diameter, so it matches sanders built for 5 inch abrasive discs, keeping tool and disc size aligned.
The 150 grit aluminum oxide disc offers a medium cut that smooths surfaces after coarser grits, creating an intermediate scratch pattern ready for finer sanding steps.
The 8-hole detail in the SAP description defines a vent pattern for sanders using that layout, allowing dust to move through the holes and away from the sanding face.
The film backing described in the product name and SAP description provides a stable base for the abrasive, helping the disc stay flat and support even contact while sanding.
The aluminum oxide abrasive called out in the description delivers a well-known cutting action at 150 grit, supporting steady material removal with a consistent scratch pattern.
The manufacturer part number SP5HLF150.8 and the SAP description tie directly to a 5 inch, 8-hole, 150 grit aluminum oxide film sanding disc, keeping ordering precise.
The SurfPrep 5 inch 150 grit 8-hole aluminum oxide sanding disc on film, silver, brings together the key details you need to standardize a mid-grit sanding step. The clearly defined 5 inch size, 8-hole layout, aluminum oxide abrasive, and film backing all come directly from the product descriptions, giving you a specific disc profile to match with 5 inch tools that use this vent pattern. With the abrasive discs classification and the SP5HLF150.8 identifier tying it to SurfPrep systems, this disc offers a well-defined option whenever your workflow calls for a 150 grit film-backed aluminum oxide step.
Sold In: 1 Box