SurfPrep 5 inch 500 grit sanding disc is a silver aluminum oxide abrasive disc on film designed for sanding tasks that call for a fine 500 grit finish. The 5 inch diameter gives coverage that suits common orbital sanders, so each pass works efficiently across cabinet parts, doors, and trim pieces. The aluminum oxide abrasive layer delivers the cutting action, allowing material removal at a controlled rate that supports fine finishing steps. The disc is built on a film backing, which provides a stable base for the abrasive so it stays flat during use and helps maintain consistent contact across the sanding surface. An 8 hole layout in the disc allows alignment to matching hole patterns on compatible sanders, supporting dust extraction paths where that pattern is used. The disc is part of SurfPrep's abrasive disc line, giving installers and shop teams a recognizable option within the Abrasive Discs category.
The sanding disc is identified in the SAP description as an H/L disc, indicating a hook and loop style attachment that mates to hook and loop sander pads. This attachment style allows the disc to be pressed onto the matching pad for use, then peeled away when the abrasive face is worn or a different grit is needed. Because the disc is built on a film backing, it maintains a thin, firm profile when attached to the pad, supporting a crisp sanding feel for detail passes. The 5 inch, 8 hole layout lets users align holes to pads with the same pattern, supporting airflow paths on those tools during sanding. Together, the hook and loop attachment, film backing, and specific diameter and hole count help keep disc changes straightforward while maintaining predictable surface contact.
This sanding disc is part of the Abrasive Discs category from SurfPrep and is identified by manufacturer part number SP5HLF500.8, so it fits directly into workflows that already specify SurfPrep abrasive discs by part number. The 5 inch diameter and 8 hole pattern suit sanders built around that size and hole layout, allowing the disc to sit flat on the backing pad as it runs. With its 500 grit rating, the disc is suited to fine sanding passes where installers or woodworkers want a smoother surface than coarser grits leave, such as late-stage prep on wood components or light refinement on already sanded substrates. The aluminum oxide abrasive on film backing gives it a defined role as a film-based disc within SurfPrep's abrasive range, so buyers can distinguish it from paper-backed options when choosing discs for different stages.
The combination of aluminum oxide abrasive and film backing gives this disc a specific working character: the aluminum oxide provides the actual cutting surface, while the film backing stabilizes that abrasive layer so contact with the workpiece stays more consistent from edge to center. The 5 inch size helps operators run full, overlapping passes on typical cabinet parts without leaving narrow tracks, which supports an even scratch pattern at 500 grit. The 8 hole pattern contributes by letting those holes align with pads that use the same configuration, maintaining clear paths where dust collection systems use that layout. The hook and loop style noted by H/L in the description further supports predictable results because discs can be removed and repositioned onto compatible pads without tools, helping crews move between grits such as 500 and coarser or finer options while staying within the same SurfPrep disc family.
This SurfPrep sanding disc uses aluminum oxide as the abrasive, which provides the cutting surface for 500 grit fine sanding tasks on suitable materials.
The SurfPrep SP5HLF500.8 disc has a 5 inch diameter, matching sanders and backing pads designed for 5 inch abrasive discs.
This film sanding disc is rated at 500 grit, placing it in the fine range for smoothing and refining surfaces after coarser sanding steps.
The disc has an 8 hole pattern, allowing its holes to align with 8 hole sander pads, which supports dust extraction paths on those tools.
The H/L designation in the description identifies the disc as a hook and loop style, so it attaches to compatible hook and loop sanding pads.
The film backing supports the abrasive layer, helping the disc remain flat and stable so contact with the work surface stays consistent during sanding.
This SurfPrep 5 inch 500 grit aluminum oxide sanding disc on film, in silver, gives installers and woodworkers a defined option for fine sanding within the Abrasive Discs category. The 5 inch diameter, 8 hole layout, and hook and loop style described in the SAP details let it work with tools designed around that size and pattern. Its 500 grit aluminum oxide face, supported by a film backing, positions it for smoothing and refinement steps when a consistent fine scratch pattern is important. For shops standardizing on SurfPrep abrasives, the SP5HLF500.8 part number provides a clear way to specify this exact disc for repeat orders through Wurth Baer Supply.
Sold In: 1 Box