PVC Fusion Maple edgebanding gives you a dedicated edge trim in Fusion Maple color for finishing raw panel edges on cabinets, casework, and shelving. The .018 inch thickness keeps the edge modest while still covering the substrate, which matters when you want a clean transition without a bulky profile on visible fronts. The 15/16 inch width is sized to cover standard 3/4 inch materials with a bit of overhang, so you can trim it flush for a straight, professional edge. The 600 FT roll length supports longer runs and repeat jobs, letting you handle multiple cabinets or a full room of casework from a single product. Made from PVC, this edge banding works well in typical woodworking shop environments where laminate and surfacing materials from Wurth Baer Supply are installed.
This 15/16 inch wide PVC edge banding is sized to overhang common 3/4 inch panels slightly, which gives you enough material for clean trimming with standard edgebanding tools. The .018 inch thickness lies close to the panel face, so you can scrape or sand transitions efficiently without removing excess material. Because the roll provides 600 FT, you can set up your edgebander or handheld tools once and run long sequences of cabinet parts, doors, or shelves without switching materials mid-job. The Fusion Maple PVC construction aligns with typical edgebanding workflows in professional woodworking shops that source laminate and surfacing materials from Wurth Baer Supply.
This PVC Fusion Maple edgebanding is suited for finishing exposed or semi-exposed edges on cabinetry, furniture, and casework panels made from sheet goods. The 15/16 inch width matches well to 3/4 inch panels used in cabinet sides, bottoms, tops, and shelves, so one size can serve many parts on the same project. The .018 inch thickness supports applications where a modest edge profile is preferred, such as cabinet interiors, closet systems, and built-in shelving that needs a finished look without a heavy edge. With a total of 600 FT on the roll, shop settings that repeat Fusion Maple programs can run batch parts for multiple projects while drawing from the same SKU, which simplifies inventory and layout planning around this specific color and size.
The defined .018 inch thickness of this PVC edge banding helps you predict how the edge will flush out against the panel surface, which is important when you want consistent reveals across doors and casework runs. The 15/16 inch width allows a controlled overhang on both faces of a 3/4 inch board, so trimming operations with routers, edge trimmers, or hand tools can remove just enough material for a uniform edge line. Because the color is Fusion Maple, cabinet shops that work with Fusion Maple sheet goods can assign this exact banding as their standard match, reducing variation from one production run to the next. The 600 FT roll length also supports repeatable setups, since you can run the same edge banding through your edgebander across many parts and orders before changing material, which helps keep machine settings and output more consistent over time.
This Fusion Maple PVC edgebanding is .018 inch thick and 15/16 inch wide, which suits edging 3/4 inch panels where you want a slight overhang for trimming to a flush finish.
The 600 FT roll length allows long cabinet or casework runs with the same material, supporting continuous edging on multiple parts without switching rolls during a job.
This Fusion Maple edge banding is made from PVC, which aligns with common edgebanding and surfacing practices in woodworking shops handling laminate-based projects.
The .018 inch thickness provides a relatively thin edge that still hides the core, helping cabinet and casework parts maintain a smooth transition between face and edge.
The 15/16 inch width slightly overhangs 3/4 inch panels, giving enough material to trim both faces cleanly for straight, consistent cabinet and shelving edges.
The Rehau part number 301674-549 designates this specific Fusion Maple PVC edgebanding in .018 inch thickness, 15/16 inch width, and 600 FT length for precise reordering.
This Rehau, Inc. Fusion Maple PVC edgebanding in .018 inch thickness, 15/16 inch width, and 600 FT length gives cabinet and casework shops a defined, repeatable solution for edging Fusion Maple projects. By using this one SKU for doors, cabinet bodies, and shelving with Fusion Maple faces, you align your edge treatment with the same color across the job. Order this PVC Fusion Maple edgebanding from Wurth Baer Supply to support streamlined, consistent edging on current and future Fusion Maple runs.
Sold In: 1 Roll