Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fustion Maple edgebanding 3mm gives panels a finished Fustion Maple edge, so raw board edges turn into a continuous wood-look surface that matches the face material on cabinets, fixtures, and furniture projects. The 3mm thick PVC construction creates a substantial edge profile, which helps hide minor core irregularities and gives casework a solid, built-up appearance in both residential and commercial work. The 1-5/16 inch width is sized to cover common panel thicknesses with trimming allowance, so installers can band and flush-trim without exposing substrate. The 300 FT length is suited to production runs or larger jobs, reducing changeovers between pieces and supporting consistent color from cabinet to cabinet. As a PVC edge banding from Rehau, Inc. in the Fustion Maple design, it fits into typical woodworking shop processes wherever PVC edgebanding is already part of the workflow.
This edge banding uses a 3mm thickness, which produces a robust edge profile that can be machined and trimmed while still presenting a solid-looking Fustion Maple strip along the panel edge. The 1-5/16 inch width gives working room beyond the panel face, which supports flush trimming on both sides and helps keep the Fustion Maple face centered even when panel thickness varies slightly. With a 300 FT length, the roll supports long linear runs of edging, which is useful when working through multiple cabinets, tall pantry units, or large casework banks needing the same Fustion Maple finish along exposed edges.
This Fustion Maple edgebanding 3mm thick, 1-5/16 inch width x 300 FT is suited to edging Fustion Maple-faced panels on cabinetry, furniture, and built-ins where a maple look is desired. Because it is PVC edgebanding in the Fustion Maple design, it aligns with projects that already specify PVC edge treatment on sheet goods carrying the same or similar Fustion Maple surface. The 3mm thickness supports use on door and drawer fronts, end panels, and shelving edges where a more substantial edge is preferred over very thin banding. The 1-5/16 inch width supports common board thicknesses used in casework, so one size of Fustion Maple strip can cover various panel applications across a job.
The 3mm thick PVC profile offers more material to trim, which supports cleaner machining at corners and around slight panel edge variations while keeping the Fustion Maple face intact through finishing steps. The 1-5/16 inch width gives installers margin above and below the panel edge, which helps maintain a uniform reveal after trimming even when panel sizing tolerances vary within a run. With 300 FT on a roll, the same Fustion Maple pattern carries across long stretches of cabinetry, which supports color and grain coordination from one cabinet bank to the next. As a Rehau, Inc. PVC edge banding product, it slots into established PVC edgebanding processes, which supports repeatable results using standard edging, trimming, and finishing routines already in place in many woodworking shops.
This Fustion Maple edgebanding is 3mm thick, with a 1-5/16 inch width and a 300 FT length, which suits covering typical panel edges through full cabinet or furniture runs.
The Fustion Maple edgebanding is PVC edge banding, which integrates into workflows designed for applying and trimming PVC on cabinet and furniture panels.
The 3mm thickness creates a substantial edge profile that tolerates trimming and helps conceal small core imperfections while presenting a solid Fustion Maple edge.
The 1-5/16 inch width extends beyond both faces of common panels, giving trimming allowance so the finished Fustion Maple edge stays centered and covers the substrate.
The 300 FT length spans multiple cabinets or long casework runs, helping maintain a consistent Fustion Maple look without frequent material changeovers during production.
Part number 303334-005 identifies this specific Rehau Fustion Maple PVC edgebanding in 3mm thickness, 1-5/16 inch width, and 300 FT length for accurate reordering.
Choosing Fustion Maple edgebanding 3mm thick, 1-5/16 inch width x 300 FT from Rehau, Inc. lines up the edge detail with Fustion Maple-faced panels across cabinets, furniture, and casework. The 3mm PVC profile, 1-5/16 inch width, and production-length 300 FT roll give woodworking shops a straightforward way to carry the same Fustion Maple appearance over exposed panel edges through repeated projects.
Sold In: 1 Roll