PVC Fusion Maple edgebanding from Rehau, Inc. is a 3mm thick edge banding in a Fusion Maple design that covers and protects exposed panel edges, so cabinet and furniture projects gain a finished, uniform appearance around the perimeter. The 15/16 inch width gives coverage for common panel thicknesses with a bit of overhang, allowing flush trimming that leaves a straight, clean edge line after machining. Its PVC construction provides a consistent, workable material along the full 300 FT length, so long runs on jobs stay visually continuous from part to part. As edge banding in the Edgebanding & Surfacing category, it is intended to finish raw substrate edges, which helps protect the core material and present a matched Fusion Maple look on doors, drawer fronts, and casework edges. The 300 FT length supports multiple cabinets or larger runs without frequent roll changes.
This edge banding is specified at 3mm thick, giving a solid band at the edge that stands up to normal machining steps such as trimming and profiling. The 15/16 inch width is wider than the finished panel edge, which provides working room for precise flush trimming on cabinet and furniture components. As a PVC Fusion Maple edgebanding in the Edge Banding product class, it is intended for use on exposed edges of panels where a Fusion Maple look is required. The 300 FT length per roll supports running multiple cabinets, shelving units, or case components from a single roll, helping maintain a continuous appearance across an installation.
This PVC Fusion Maple edgebanding from Rehau, Inc. is part of the Edgebanding & Surfacing category, so it is suited to finishing exposed edges on cabinet boxes, doors, drawer fronts, and furniture panels that call for a Fusion Maple appearance. The 3mm thickness gives a more pronounced edge profile than thin tape-style edges, which works well on commercial or residential casework where a solid, defined edge is preferred. With a 15/16 inch width, this edge banding is sized for standard panel work, offering enough coverage for common sheet goods while still trimming back cleanly. The 300 FT roll length makes it practical for shop environments doing runs of Fusion Maple-faced components, supporting consistent edge treatment from the first piece to the last. As an Edge Banding product, it plays the role of protecting the panel core while visually tying edges into Fusion Maple faces or surfaces.
The 3mm thick specification provides a stable edge band that handles normal trimming and profiling without feeling overly delicate, which helps keep the edge line even across multiple machining passes. Its 15/16 inch width allows installers to align the band slightly proud of the panel face and then trim back, reducing the risk of leaving gaps or exposing the substrate along the edge. Because the material is PVC, characteristics remain consistent from one end of the 300 FT roll to the other, supporting predictable performance when running multiple parts in a single setup. The full 300 FT length means long cabinet or furniture runs can use the same roll of PVC Fusion Maple edgebanding, which helps maintain a continuous Fusion Maple look across doors, fronts, and carcass edges in the finished work.
This PVC Fusion Maple edgebanding measures 3mm thick, 15/16 inch wide, and 300 FT long, giving a substantial edge profile, trimming allowance, and enough length for multi-piece cabinet or furniture runs.
The 301383-050 edgebanding is made from PVC, providing a consistent, workable material along the roll that supports predictable machining and finishing around panel edges.
The 3mm thickness creates a more substantial edge band, giving panels a defined edge profile that stands up to normal trimming and handling on cabinet and furniture components.
The 15/16 inch width provides coverage beyond the panel edge, allowing installers to trim back to a clean, flush line without exposing the core material on cabinet and furniture parts.
The 300 FT roll length supports longer production runs or multiple cabinets, helping maintain a continuous Fusion Maple look across many parts from the same roll.
This Fusion Maple PVC edgebanding is manufactured by Rehau, Inc., aligning it with the brand specified in the Edgebanding & Surfacing product information.
This PVC Fusion Maple edgebanding, 3mm thick and 15/16 inch wide in a 300 FT length, gives cabinet and furniture projects a coordinated Fusion Maple edge that protects exposed cores. For work requiring consistent Fusion Maple edges across multiple parts, this Rehau, Inc. edge banding offers a defined profile, trimming allowance, and roll length suited to shop and jobsite production needs.
Sold In: 1 Roll