Edgebanding PVC Fusion Maple Flex 3mm identifies this product as a PVC edge banding in a Fusion Maple design, so it finishes exposed panel edges to visually match Fusion Maple surfaces on cabinets, casework, or fixtures. The 3mm thickness creates a substantial edge profile, which helps cover core material and minor machining variations on panel edges. The 15/16 inch width gives coverage over standard 3/4 inch panels with room to trim, supporting a crisp finished line after edge trimming. The 300 FT length provides a continuous roll, which supports longer runs and multiple cabinet pieces without frequent roll changes. The PVC material forms a durable edging layer, so the panel edge gains a uniform appearance relative to the face material. The Fusion Maple color identity helps the edge transition blend with Fusion Maple-style laminates or surfaces, which matters where visible edges impact the overall installation look.
The 15/16 inch width on this PVC Fusion Maple Flex banding gives extra material beyond the edge of a 3/4 inch panel, so standard edge trimming tools can remove the overhang and leave a clean, straight edge. The 3mm thickness adds a defined edge profile, which supports a smooth transition between the banded edge and the panel face after trimming and finishing operations. The 300 FT roll format suits shop workflows that run multiple panels in sequence, allowing continuous feeding through edge banding equipment. As an edge banding in the Edgebanding, PVC category, it is suited to edging compatible sheet goods where a Fusion Maple appearance is desired on exposed edges.
This edge banding is classified as Edgebanding, PVC and identified as Fusion Maple Flex 3mm Thick, 15/16 inch Width x 300 FT, so it is oriented to finishing panel edges in woodworking and cabinet shops. The Fusion Maple naming aligns the edging with Fusion Maple-faced boards, helping doors, drawer fronts, and carcass edges present a coordinated appearance when viewed together. The 3mm thickness supports an edge detail that reads as substantial next to the panel face, which is useful where exposed ends of casework need a solid-looking edge. The 15/16 inch width covers the edge and slight overhang on either side, supporting trimming passes that leave a tight joint line against laminate or other surfacing materials. The 300 FT length allows the same material to be used across a full project, promoting visual consistency from one cabinet or panel to the next.
The PVC Flex construction works with typical edge banding machinery that handles PVC edgebanding, which supports repeatable application along straight panel runs in a production setting. The 3mm thickness provides a uniform dimension for setup, so trimming and flush routing operations can be dialed in once and carried through multiple panels of the same build. The 15/16 inch width offers predictable overhang on standard panel thicknesses, which helps operators maintain consistent trimming results without risking edge exposure. The 300 FT roll length reduces mid-run material changes, supporting steady throughput when edging cabinet boxes, shelving, or related parts. The manufacturer part number 301021-571 identifies this exact Fusion Maple PVC edge banding, which assists in matching repeat orders to existing installations where the same edge appearance is required.
The edgebanding is PVC, which provides a consistent, machinable edging layer that works well with typical edge banding equipment in cabinet and woodworking shops.
The 3mm thickness creates a more substantial edge profile, helping cover core material and giving a solid-looking edge when doors, drawer fronts, or cases are viewed from the side.
The 15/16 inch width gives overhang beyond a 3/4 inch panel, allowing trimming tools to flush the edge without exposing the substrate, which supports clean visual lines.
The 300 FT roll length supports longer cabinet or casework runs, so many pieces can be edged from one roll, which streamlines shop handling and setup.
The Fusion Maple description aligns the edging with Fusion Maple-faced panels, helping edges visually coordinate across doors, drawer fronts, and cases in the same project.
Manufacturer part number 301021-571 specifically identifies this Rehau PVC Fusion Maple Flex 3mm, 15/16 inch width, 300 FT edgebanding for accurate reordering and project matching.
This Rehau, Inc. PVC Fusion Maple Flex 3mm Thick, 15/16 inch Width x 300 FT edge banding combines a Fusion Maple appearance with a 3mm profile and a 15/16 inch coverage width, so panel edges can align visually with Fusion Maple-faced surfaces. The 300 FT roll format supports production workflows where many edges must match across a run of cabinetry or casework. For projects using Fusion Maple-style surfaces where exposed edges are visible, this edge banding provides a defined, coordinated finish along doors, drawers, and carcass panels.
Sold In: 1 Roll