Edgebanding PVC Designer White 3mm identifies this Rehau, Inc. PVC edge banding as a 3mm thick, Designer White solution for panel edges, giving casework and cabinetry a consistent finished perimeter. The 1-5/16 inch width matches common panel thicknesses, so the banding covers the full edge with room to trim back, helping installers deliver clean, straight lines. Its PVC construction provides a uniform material along the entire 300 FT length, which supports repeatable results across multiple cabinets or runs. The 300 FT roll length keeps one part number, 302114-091, in play over longer jobs, simplifying edge treatment on a full project. As an edge banding product class, it defines and protects raw edges, allowing fabricators to turn cut panels into finished components using one consistent Designer White finish along all exposed sides.
This PVC edge banding uses a 3mm thickness, giving installers enough material to trim and scrape without cutting through, which supports a smooth, flush finish after bonding. The 1-5/16 inch width provides extra coverage on either side of the panel edge, so alignment during application is more forgiving while still allowing a clean final cut back to the board. The 300 FT roll format means one continuous run of material is available for repetitive cabinet components, which supports efficient workflow on shop equipment. As an edge banding from Rehau, Inc., it is intended to be applied along exposed panel edges, turning cut sheet stock into finished cabinet parts with a matching Designer White edge.
This Rehau, Inc. PVC edge banding, identified as Manufacturer Part 302114-091, is specified as Designer White, 3mm thick, and 1-5/16 inch wide, aligning it with panel-based cabinet and furniture work where a white edge is required. The edge banding product class links it directly to finishing exposed edges on casework, shelves, and fronts made from sheet goods. Its 300 FT length allows shops to run multiple parts, from cabinet sides to tops and bottoms, using the same roll so every finished edge carries the same Designer White tone. Because it is PVC, the material maintains a consistent appearance along the entire length, which is valuable when multiple cabinets sit next to each other and their edges remain visible. The combination of thickness, width, and color makes this banding suited to projects that call for a noticeable, uniform white edge line on cut panels.
The 3mm thickness on this PVC edge banding provides a deeper edge surface than thinner tape, giving fabricators a more defined edge profile once trimmed, which supports crisp transitions between the face of the panel and the edge. With a 1-5/16 inch width, there is allowance for slight placement variation during application, while still trimming back to a precise flush edge, reducing rework from misalignment. The 300 FT roll format supports production-style workflows by keeping a single continuous strip available, reducing joints along long runs and keeping the Designer White look uninterrupted. Identifying the banding by Manufacturer Part 302114-091 and SAP description 1-5/16'X3MM DESIGNER WHITE FLEX 300FT helps shops repeat orders for the same material on future jobs, maintaining consistency across projects over time. As Rehau PVC edge banding, it defines a repeatable solution for turning raw panel edges into finished, Designer White details.
This Rehau, Inc. edge banding is PVC, providing a consistent synthetic edge material along the full 300 FT length for finishing exposed panel edges.
The edge banding is 3mm thick, giving a substantial edge that trims cleanly and creates a defined profile on cabinet and furniture panels.
This PVC edge banding is 1-5/16 inch wide, offering coverage beyond typical panel thickness to allow trimming back to a flush, clean edge.
The roll length is 300 FT, supporting multiple cabinets or runs from a single roll while keeping the Designer White color consistent across parts.
The manufacturer part number is 302114-091, which identifies this specific Designer White, 3mm thick, 1-5/16 inch wide PVC edge banding.
This PVC edge banding is applied to exposed panel edges so cut sheet goods gain a finished Designer White perimeter for cabinet and furniture projects.
This Rehau, Inc. PVC edge banding delivers a 3mm thick, 1-5/16 inch wide Designer White edge over a 300 FT roll, aligning with cabinet and panel work that calls for a consistent white perimeter. Using the defined Manufacturer Part 302114-091 simplifies repeat ordering when the same look is required on future jobs. For shops working regularly in white casework, this single edge banding covers exposed edges across multiple components while keeping color and dimensions consistent from piece to piece.
Sold In: 1 Roll