Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Designer White Edgebanding PVC 1mm identifies this Rehau, Inc. edge banding as a dedicated solution for finishing raw panel edges, giving designers a consistent Designer White color across exposed cabinet and furniture edges. The PVC construction ties directly to the Edgebanding, PVC category, providing a work-ready material for covering cut substrate edges in laminate or casework projects where a PVC edge is specified. The 1mm thick profile gives a defined edge that works well on cabinet doors, drawer fronts, and carcass panels needing a solid-looking, furniture-grade edge treatment. The edge banding is part of the Edge Banding product class, so it is purpose-built to cap and protect the edge of sheet goods in woodworking environments. By using a matching Designer White material, installers keep visual continuity between faces and edges, supporting clean lines on commercial or residential projects.
The stated 15/16 inch width and 1mm thickness define how this Designer White Edgebanding, PVC 1mm Thick, 15/16 inch Width x 600 FT seats on typical 3/4 inch panels, giving working tolerance for trimming without risking undersized coverage. The 600 FT length described in the Web Description and SAP Description means installers can work from a single extended run, which supports streamlined edgebanding workflow on production lines or in shop environments handling repeated cabinet components. Positioning this Rehau, Inc. edge banding from the Edge Banding category on panel edges allows standard edgebanding equipment to trim and finish the overhang efficiently, aligning with typical fabrication sequences for laminate and melamine casework.
The product name Designer White Edgebanding, PVC 1mm Thick, 15/16 inch Width x 600 FT clearly defines this material as edge banding, so its role is to cover and finish the exposed edges of boards used in cabinets, fixtures, and other panel-based builds. As part of the Edgebanding & Surfacing category and Edge Banding product class, it is intended to work alongside sheet goods and surfacing materials in woodworking shops, supporting consistent detailing on vertical and horizontal edges. The Designer White description signals a light, neutral presentation, so when installers apply this PVC along cabinet sides, shelves, or fronts, the edges visually align with matching Designer White design schemes. By using a single 600 FT length, shops can process long runs of cabinet parts without frequent material changes, which supports continuous feeding through edgebanding machines on repetitive jobs.
The 15/16 inch width noted in the Web Description and SAP Description gives a practical advantage over nominal 3/4 inch panel thickness because it offers a controlled amount of overhang above and below the board, which is then trimmed for a tight, flush edge. The 1mm thickness called out in both the product and web descriptions provides a sturdier edge than ultra-thin tape, giving operators enough material to trim and scrape without chipping through to the substrate during finishing passes. The PVC designation in the Category Edgebanding, PVC identifies a plastic-based material that works predictably with common edgebanding equipment, supporting consistent feed and trimming behavior along straight edges. Because the Manufacturer Part # 302044-042 uniquely identifies this Designer White PVC profile, shops can match previous installations by specifying the same edge banding on follow-up or expansion projects, helping maintain uniform visual results across related work.
Designer White Edgebanding PVC 1mm is an edge banding from Rehau, Inc. in the Edgebanding, PVC category, used to finish and protect exposed edges of cabinet and furniture panels.
The Rehau, Inc. Designer White edgebanding has a 15/16 inch width, giving slight overhang on typical 3/4 inch panels so edges can be trimmed flush for a clean finish.
The 1mm thick PVC edgebanding provides a more substantial edge profile than thin tape, allowing trimming and scraping while maintaining a solid, furniture-style edge on cabinet parts.
The Designer White Edgebanding PVC 1mm Thick, 15/16 inch Width x 600 FT description specifies a 600 FT length, supporting longer production runs with fewer material changeovers.
This 15/16 inch, 1mm thick Designer White PVC edge banding is manufactured by Rehau, Inc., giving shops a defined brand source for consistent repeat orders.
Manufacturer Part 302044-042 uniquely identifies this Rehau Designer White PVC edge banding, helping buyers specify the exact 1mm thick, 15/16 inch width profile for matching work.
The Web Description and SAP Description both define this product as 15/16X1MM DESIGNER WHITE PVC 600FT, aligning it directly with cabinet and panel edge finishing tasks that call for PVC material. By choosing this Rehau, Inc. Designer White Edgebanding, PVC 1mm Thick, 15/16 inch Width x 600 FT from Wurth Baer Supply, shops can match the specified Designer White color, 1mm thickness, and 15/16 inch width across current and future projects that rely on consistent edge banding dimensions.
Sold In: 1 Roll