PVC edgebanding designer white is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so panel edges gain a clean, uniform designer white appearance along the run. The .018 inch thickness keeps the edge profile slim while still covering the substrate edge, which helps maintain tight reveals on casework and fixtures. The 15/16 inch width lets the edgebanding span panel edges in that size range, giving a little margin for trimming while still matching common panel thicknesses. The 600 FT length in a single run supports longer production jobs, so the same material color and size can be used across multiple cabinets or fixtures without changing rolls midstream.
The .018 inch thickness of this PVC edgebanding from Rehau, Inc. sets how far the material stands proud of the substrate before trimming, which affects how it behaves with trimming tools and edge banding machines. The 15/16 inch width defines how much coverage is available across the panel edge, so installers can align the banding to the edge and trim back the slight overhang to a flush finish. The 600 FT length means one roll can serve many edges in the same setup, which supports consistent feed and minimizes interruptions during edge banding operations.
This product is described as Edgebanding, PVC Designer White .018 inch Thick x 15/16 inch Width x 600 FT, so it is suited to situations where a designer white PVC edge is needed along panel edges in that width range. The 15/16 inch width works on edges sized to be covered by material of that width, which allows the banding to span the full thickness of the panel with enough overhang for clean trimming. Being classified under Edgebanding & Surfacing and Edgebanding, PVC places it within typical panel, cabinet, or fixture work that uses PVC banding to finish cut edges.
The .018 inch thickness provides a known material profile at the edge, so settings on edge banding and trimming equipment can be dialed to that thickness and reused on later runs. The 600 FT length per roll means a shop can run many parts using the same roll of designer white PVC edge banding, which keeps color and dimension consistent across a project or across repeated work for the same design. The product is branded Rehau, Inc., giving a clear manufacturer identity that can be referenced when matching existing installations that already use this specific 302284-613 PVC edgebanding in designer white.
This Rehau, Inc. PVC edge banding has a .018 inch thickness, a 15/16 inch width, and a 600 FT length, which sets its fit on panel edges and coverage per roll.
This product is described as Edgebanding, PVC Designer White, so it is made from PVC and presents a designer white finish along the treated edge.
The .018 inch thickness keeps the banding relatively thin at the edge, which supports a subtle edge profile and straightforward trimming during finishing.
The 15-16 inch width spans the edge thickness with some overhang, enabling alignment on the edge and trimming back to a flush finish after bonding.
The 600 FT length supplies enough PVC edgebanding for many edges in one run, which supports consistent appearance across larger or repeated projects.
The manufacturer part number 302284-613 uniquely identifies this Rehau, Inc. designer white .018 inch x 15-16 inch x 600 FT PVC edgebanding for sourcing and reorders.
This Rehau, Inc. PVC edgebanding in designer white provides a .018 inch thick, 15/16 inch wide, 600 FT solution for covering panel edges in that size range. When a job calls for a consistent designer white PVC edge across multiple pieces, this 302284-613 edge banding allows the same color and dimensions to be used from piece to piece.
Sold In: 1 Roll