PVC Designer White edgebanding from Rehau is PVC edge banding designed to finish exposed panel edges with a consistent Designer White surface. The .018 inch thickness gives a low-profile edge that blends with thin laminated panels, which supports a clean, modern look on cabinets and casework. The 15/16 inch width covers standard 3/4 inch board edges with room to trim, helping installers achieve straight, flush edges after routing or trimming. The 600 foot length per roll supports longer production runs and repeat jobs using the same material, which helps maintain color and finish consistency across multiple cabinets or furniture pieces. As a PVC edge banding product in Designer White, it suits projects using matching white surfacing, allowing fabricators to keep edge treatment aligned with the chosen panel finish on residential or commercial work.
This Rehau PVC edge banding with .018 inch thickness behaves like a thin edging layer, which supports smoother trimming passes and fine edge detailing on cabinets and furniture parts. The 15/16 inch width covers the face and back corner of 3/4 inch substrates, giving installers some lateral tolerance during placement that can speed application on straight runs. Over a 600 foot length, installers can set up repeated cutting and edging workflows, which helps maintain consistent edge appearance across doors, drawer fronts, and carcass parts within the same project. As PVC Designer White edging, it ties directly into white finished panel layouts, which supports straightforward planning of edge treatment around standard casework dimensions.
This Rehau, Inc. edge banding is classified as PVC Designer White in the Edgebanding, PVC category, which positions it for use on panels where a matching white PVC edge is required. The 15/16 inch width is suited to covering exposed edges on 3/4 inch cabinet sides, shelves, and doors, giving coverage for both faces with a slight overhang for trimming. In cabinet shops and woodworking environments, the 600 foot roll length supports repetitive edging on multiple units, so all visible edges on coordinated pieces can share the same thickness and color. As edge banding, it serves as the finishing strip on raw panel edges, turning cut substrate edges into visually finished surfaces that integrate with the chosen Designer White surfacing.
The .018 inch thickness of this PVC Designer White edgebanding helps installers create a sharp, tight edge transition, because the thin material reduces the step between face material and edge. That thin profile supports clean trimming with standard edge trimmers or routers, which can streamline finishing of cabinet components. The 15/16 inch width gives working tolerance along the edge, so slight placement variation still trims back to a straight line, helping reduce rework on long runs. Over 600 feet, shops can standardize on a single Rehau part number 302284-814 for a run of casework, which simplifies material selection when repeating jobs in the same Designer White finish. Being in the Edge Banding product class, this PVC strip plays a dedicated role in closing off raw edges so finished pieces present a continuous, coordinated surface from panel face through the edge line.
The edgebanding is .018 inch thick and 15/16 inch wide, which suits covering 3/4 inch panel edges with enough excess for trimming to a clean finished line.
The roll length is 600 feet, which supports edging multiple cabinets or furniture components in the same project while maintaining consistent color and thickness.
This edge banding is PVC, which fits typical edgebanding applications on wood-based panels in cabinet and furniture fabrication work.
The .018 inch thickness provides a thin edging layer, which helps create a subtle edge transition and supports smooth trimming for finished cabinet parts.
The 15/16 inch width covers 3/4 inch panel edges with extra margin, which provides room for alignment and trimming to achieve straight, chip-free edges.
Part number 302284-814 identifies this specific PVC Designer White .018 inch thick, 15/16 inch wide, 600 foot edge banding for ordering and repeat use.
This PVC Designer White .018 inch thick, 15/16 inch wide, 600 foot Rehau edge banding gives cabinet and woodworking shops a defined material for finishing white panel edges. Select this roll to align edge thickness, width, and color on casework that relies on consistent white PVC edging.
Sold In: 1 Roll