15/16X1.2MM EB, WHITE FUSION EDGE, Surteco Usa Inc WT9375-40-2002SQ

15/16X1.2MM White Fusion Edge Banding Use

15/16X1.2MM EB WHITE FUSION EDGE is a PVC edge banding from Doellken Woodtape that finishes exposed panel edges so cabinet and furniture projects present a clean, unified surface. The 15/16 inch width covers typical panel thickness with enough margin to trim flush, which supports a straight, professional edge after processing. The 1.2mm thickness gives the edge a substantial feel, so high-contact areas such as cabinet doors or work surfaces maintain a consistent profile over time. As PVC edge banding, it is designed for edgebanding and surfacing applications, which keeps material choices aligned across the job. The WHITE FUSION EDGE description identifies the color family and visual intent, so fabricators can match this banding to white-faced panels within the same project line. The association with Surteco Usa Inc WT9375-40-2002SQ provides a reference for designers and shops who coordinate finishes by manufacturer codes.

Key Edge Banding Details For Trade Workflow

• The 15/16 inch width spans standard panel thickness with trimming allowance, which streamlines sizing on edgebanders and manual trimmers and keeps set-up focused on feed and cut rather than constant width changes.
• The 1.2mm thickness defines a sturdy edge profile, which supports consistent rounding or light profiling without cutting through to the substrate during finishing passes.
• Being a PVC edge banding in the Edgebanding & Surfacing category ties it directly to casework and furniture panel work, which keeps material selection straightforward when matching to other PVC-based surfacing components.
• The WHITE FUSION EDGE identification narrows the finish choice to a white tone aimed for fusion with coordinating surfaces, helping designers keep a unified appearance across doors, drawer fronts, and cabinet sides.
• The Doellken Woodtape brand and Surteco Usa Inc WT9375-40-2002SQ reference give shops clear product identity, which supports consistent reorders when a specific white edge has been approved on prior projects.

Edgebanding Fit, Width, And Thickness In Use

The 15/16 inch width on this Doellken Woodtape PVC edge banding covers the face of typical casework panels with extra margin, which simplifies alignment on edgebanders and hand-applied runs before trimming. The 1.2mm thickness supports an edge that can be lightly profiled or eased without sacrificing coverage at corners, which is useful where panels meet at door gaps or carcass fronts. As an Edge Banding product within the Edgebanding & Surfacing category, it is intended to work as the finishing layer on exposed panel edges, so fabricators can route and trim it as part of a standard panel-processing workflow. The WHITE FUSION EDGE designation defines both color and finish intent, helping keep visual lines crisp where white fronts, ends, and shelves meet.

Applying White Fusion Edge Banding In Projects

Where This PVC Edge Banding Is Used

This Doellken Woodtape edge banding is identified as Edge Banding in the Edgebanding & Surfacing category, which positions it for use on cabinet, furniture, and similar panel-based constructions where raw substrate edges need a finished surface. The 15/16 inch width relates directly to common panel thicknesses, allowing the banding to be applied along doors, drawer fronts, cabinet sides, shelves, and partitions while leaving trim allowance. With its 1.2mm thickness, it suits applications where the edge may be handled regularly, such as kitchen cabinets, storage units, and casework runs. The WHITE FUSION EDGE description highlights its role where a white visual line is desired along exposed edges, tying together panel faces and edges into a single continuous appearance. The Surteco Usa Inc WT9375-40-2002SQ reference supports projects organized around that specific white finish code so that panels and edges share the same visual target.

Details That Support Consistent Edgebanding Results

The defined 15/16 inch width of this 15/16X1.2MM EB WHITE FUSION EDGE product gives installers a predictable margin for trimming, which helps maintain straight edges even when panel sizing varies slightly across a run. Its 1.2mm thickness creates a visible yet controlled edge profile, allowing light corner easing while still keeping the core completely covered after machining. As PVC edge banding within the Edgebanding & Surfacing family, it behaves consistently with other PVC surfaces, which supports uniform machining, trimming, and cleaning characteristics across the job. The Doellken Woodtape brand and manufacturer part number 2002-B1-1540-600-SQ040 clearly define the exact product, which simplifies matching replacement lengths to existing installations that already use this specific white fusion edge. The web description linking it with Surteco Usa Inc WT9375-40-2002SQ provides another identifier, so specification documents and shop orders can point to the same edge material without ambiguity.

Common Questions About White Fusion Edge Banding

Selecting This Edge Banding For White Panel Work

This Doellken Woodtape 15/16X1.2MM EB WHITE FUSION EDGE PVC edge banding provides a defined 15/16 inch width, 1.2mm thickness, and white fusion finish that align with panel-based cabinet and furniture construction. For projects keyed to Surteco Usa Inc WT9375-40-2002SQ or manufacturer part number 2002-B1-1540-600-SQ040, choosing this edge banding keeps exposed edges visually consistent with the specified white surfaces and supports repeatable, panel-focused shop workflows.